Review of my officially boosted / Ghettodyne 2.2.1 crx
 

Well after a few days of trying to figure out why car would not start, i found out something was rigged with the harness.. anyway.. finally installed my turbo kit i got from beau a while back here is my full setup.

1991 Crx si
D16Z6 (SOHC Vtec)
STD Manifold
IHI Turbo At 8psi
Greddy Type-s Bov
450cc DSM Injectors
2.5 inch downpipe Bolted up to stock No Cat Exhaust lol
2.5 inch Charge pipe
Autometer Steel Braided Return Line
Tuner Toys Cute Oil Fitting
Tyrus First GB Intercooler
Chipped Pm6 Running Ghettodyne 2.2.1 Boost Code


it was very hot today as i drove the car home from my cousins shop where i installed my kit (he has tools and confertable area) the home depot coupler melted thats near the manifold so i guess i need to buy something good for that. i didnt get to do any pulls just drive it slowly home.

Around 12am i got so much anxiety i went to my garage and rigged up the melted coupler and attached my Ebay intakes coupler too it.. Double Protection.. got em on there tight and went for a spin up and down my avenue.. no cars and hella long.

The car ran beutiful, little rich but thats ok nothing that cant be fixed. i was just straight beating the piss out of it by the 3rd pull. it was so much fun a few people chillin around were just lookin at me driving like a total ---- tard, i took the car upto 100mph or so and it was really smooth, on one pull though my fender liner on passanger side just ripped the ---- off and flew in the air.. very funny i thought my intercooler ripped off or something.. after about 10 runs up and down the couplers started to melt again so i put the car away.. I had NO VTEC in my car cuz im waiting on an rpm activator and i need a real exhaust this 2.5 inch to 1.25 inch peehole exhaust isnt working for me. Ghettodyne is pretty cool i got no cell codes.. well i did code 16 .... Fuel injector cuz i was testin to see if there was a pulse from injectors when my harness was acting up. but i cleared the code and after about 20 minutes of driving it in VAC (yeah i felt the jerks) which didnt bother me.. reminded me of when i was testing my GTI's chip with the hiccups.. nothing major during boost its not there. Overall i cant wait to purchase prog studio so i can modify values on my ghettodyne tune a little bit and test it out then when its fully done off to the dynos... im please with the results of this ghetto project.. i will have pics soon of my ---- car in its glory..

- Kev

Re:Review of my officially boosted / Ghettodyne 2.2.1 crx
 

and the heavens opened and said: "Let there be boost management for free!" Nice story! ;D

Re:Review of my officially boosted / Ghettodyne 2.2.1 crx
 

Thanks a lot man.. i love your program its gods gift to the poor man hehe i just got my rpm activator today so ima try boosted vtec.. i need to order prog studio so i can start fiddling a little bit with the program and see what stuff i can break :)

Re:Review of my officially boosted / Ghettodyne 2.2.1 crx
 

dude.. isnt prog studio free? i downloaded it from batronix.com and i have been playing around with some files from ghettodyne. is this not the full version or something???

Re:Review of my officially boosted / Ghettodyne 2.2.1 crx
 

:D hahaha, you ripped your fender lining out!!! I bet that scared the shyt outta you.

Re:Review of my officially boosted / Ghettodyne 2.2.1 crx
 

I dont understand y u need program studio? isn't all the editing done in ghettodyne?

Re:Review of my officially boosted / Ghettodyne 2.2.1 crx
 

Glad to hear it runs well. ;D

asm had his ECU socketed and chipped by someone else while he waited for his burner to arrive... lack of experience is why he's got a little mixed up nomenclature, nothing a few hours of mucking about won't completely remedy.

Re:Review of my officially boosted / Ghettodyne 2.2.1 crx
 

yeah i got my burner built by someone else i have prog studio and i can read files and everything but i dont think i can write to my 29c256 chips without the full version of prog studio or can i use the demo?

Re:Review of my officially boosted / Ghettodyne 2.2.1 crx
 

Awesome man! I'm glad to finally hear some good news from someone.

Btw, I've ripped out my passenger wheel well plastic thing at around 100mph too ;) It got on the tire and made the loudest sound I've ever heard (I figured I'd have a flat), and it just meleted the whole cover

Re:Review of my officially boosted / Ghettodyne 2.2.1 crx
 

graham, didn't you get a ticket a while ago? what's going on with that? i assume your still raping the rex regardless ;)

Re:Review of my officially boosted / Ghettodyne 2.2.1 crx
 

Yeah.. and actually I got two tickets within 5 seconds apart, but hopefully only one will count (would be the faster of the two).

I haven't gone to court yet, so no news on that.. the rex has been very lonely and it's driving me crazy.

Re:Review of my officially boosted / Ghettodyne 2.2.1 crx
 

Hey, hey, hey.. I'm the one who chipped his ECU. What's that got to do with his mixed up nomenclature? If anything it's this rasafrackin' Internet that has him all discombobulated. Not my ECU. :P

Re:Review of my officially boosted / Ghettodyne 2.2.1 crx
 

i did my ecu and i may have fucked it up.

o well

Re:Review of my officially boosted / Ghettodyne 2.2.1 crx
 

hey asm, hows she running? still good?

Re:Review of my officially boosted / Ghettodyne 2.2.1 crx
 

well it would of been running good but i got a piece of ---- summit rpm activator and i think one of the wires touched the ecu and fried it.. i got another pm6 which i will chip but this time ima get a v-afc and use ghettodyne for timing retard only, so i can get the smooth boost transition as opposed t othe hiccups during vac.. if ima drive this car around places i cant have all that jerking around.. makes it looks like i dont know how to drive a stick shift lol.

Re:Review of my officially boosted / Ghettodyne 2.2.1 crx
 

yeah i was thinking of doing the same thing but if i wanted to make a map like that with ghettodyne would i just punch in the values from the turbo ignition map onto the NA map? but then how will the ecu retard the timing if its not seeing boost (afc hack)? or will it be ok to just to type in values that are about 2 to 3 degrees less than the stock ones?

Re:Review of my officially boosted / Ghettodyne 2.2.1 crx
 

well i know my turbo starts to spool at 3000 rpm so i figured id retard the values after 3k rpm... but... what happens is when im in vacume and not spooling ill be in timing retarded but i figured .75 degree retard shouldnt hurt the car in vaccume. its not a 400hp monster just a little single cam with a silly little turbo.
pushing like 150hp if that.

Re:Review of my officially boosted / Ghettodyne 2.2.1 crx
 

true but wouldnt the afc compensate for the timing by advancing it because of the lowered map signal? then would you end up at basically a stock timiming setting, instead of an advanced setting? so it would all even out in the end.

Re:Review of my officially boosted / Ghettodyne 2.2.1 crx
 

true but wouldnt the afc compensate for the timing by advancing it because of the lowered map signal? then would you end up at basically a stock timiming setting, instead of an advanced setting? so it would all even out in the end.

Re:Review of my officially boosted / Ghettodyne 2.2.1 crx
 

actually, the timing retard is to compensate for the afc timing advance. ;)

Re:Review of my officially boosted / Ghettodyne 2.2.1 crx
 

yeah so it would all even out in the end....... right?

Re:Review of my officially boosted / Ghettodyne 2.2.1 crx
 

Only one way to find out... =)
Trial and error...

Turboef9 has this setup.. he claims its smooth and works flawless..

Re:Review of my officially boosted / Ghettodyne 2.2.1 crx
 

What setup do I have? Sorry, I haven't been paying much attention to this board recently.

Re:Review of my officially boosted / Ghettodyne 2.2.1 crx
 

nice work asm