Resistor Box Resistance
My resistor box is resisting about 7ohms.
Is this good enough for DSM injectors? I thought that they required 10ohm resistors? |
Re: Resistor Box Resistance
Don't remember what the stock Honda ones are. I know they work fine though. So if you are getting 7, then that is ok.
the 10ohms is the radioshack in-line ones, which work. |
Re: Resistor Box Resistance
well my setup is running terribly so i'm wondering if maybe my resistor box isnt working like it should
|
Re: Resistor Box Resistance
I thought they were meant to be about 6-7 ohms
|
Re: Resistor Box Resistance
Originally Posted by myshtern
well my setup is running terribly so i'm wondering if maybe my resistor box isnt working like it should
|
Re: Resistor Box Resistance
Originally Posted by myshtern
well my setup is running terribly so i'm wondering if maybe my resistor box isnt working like it should
|
Re: Resistor Box Resistance
Originally Posted by surfer
I thought they were meant to be about 6-7 ohms
:4 |
Re: Resistor Box Resistance
Saturated injectors are 14 Ohms resistance as measure at the injector tabs. Peak and Hold should be between 3-4 Ohms. You need to get the 10 watt 10 Ohm resisters from Radio Shack. They are about 1.5 in long and square. That's what I used and they work great.
|
Re: Resistor Box Resistance
Yeah it was defintely the MAP sensor, I got it fixed up.
|
Re: Resistor Box Resistance
Originally Posted by WhiteTeg26
Saturated injectors are 14 Ohms resistance as measure at the injector tabs. Peak and Hold should be between 3-4 Ohms.
|
Re: Resistor Box Resistance
Umm thanks.....why?
|
Re: Resistor Box Resistance
Low Z measure exactly 2.4 ohms for me. That leaves you 16-21% off, a significant margin of error.
#1 rule of diagnosing no CEL driveability problems, "check your grounds." 2.4 and 4.0 ohms can be the difference between driving home and fucked. Ask Sarah Ruth's Bronco. Ask Caveman's non running MPFI conversion. |
All times are GMT -5. The time now is 11:01 AM. |
© 2024 MH Sub I, LLC dba Internet Brands