question about my DSM 450s
#1
question about my DSM 450s
i bought some 450 dsm injectors on ebay. I am in the process of installing them and the harness dont snap in to eachother. So im going to have to cut wires. The wires arent the same color. Does anyone know what color has to go to what? my DSM's have a yellow and black stripe wire and a black and blue stripe wire. My 98 honda prelude has a yellow wire and a yellow wire with black stripe. what do i do?
#3
Re:question about my DSM 450s
resistor box? I didnt think preludes had that. I was told that you just take the old ones out and put the new ones in. I figured i might have to splice some wires. but didnt know i would have to mess with the ECU
#5
Re:question about my DSM 450s
i've heard of some dsm just connecting right in to some hondas harness. I spliced the wires put them back together the way they would be in the stock honda harness and put them in the DSM harness. So its just like using the stock harness from a honda. I havnt heard about putting in resistors if you have the wiring already and know where it goes. Im gonna try it if it starts it should idle like its running RICH... if not it shouldnt start at all... correct?
I hope im not going to hurt anything. Im not going to drive it
I hope im not going to hurt anything. Im not going to drive it
#9
Re:question about my DSM 450s
Yes, listen to the wise men. You're going to ---- something up. There is a reason people use the resistor boxes. If your Prelude was a few years older it wouldn't need the resistors, but since it isn't, you do. :P
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#10
Re:question about my DSM 450s
yea i need something. I turned the AFC all way to -50 and it still idled low and almost stalled when i gave it gas. Where do i get inline resistors and how much are they? this sucks i really wanted to be done!