Prolly going TE! help me out..
#11
Re:Prolly going TE! help me out..
i plan on blowing this engine and saving up for a B-series, so 450cc injectors are not needed...
i Have the TE program 2.1 i think and it wont' allow me to do 390cc injectors, why?
i Have the TE program 2.1 i think and it wont' allow me to do 390cc injectors, why?
#14
Re:Prolly going TE! help me out..
Originally Posted by DraZtiK
if someone can make me a base map for my set up i would appreciate it!! let me know and i'll tell you my set up and just send it to my email!!! BTW i'm running DSM 390cc injectors! can TE do that? i can't get it to work with anything smaller than 410cc or whatever..
I like the Batronix and Willem burners for the money. The Moates is a handy burner but it only accepts 3 types of chips...one of which is discontinued now and the other two most people dont know how to use correctly (from what I have seen)
As far as why you cant scale for 390s, TurboEdit doesnt let you go backwards when rescaling injectors.
http://www.-------------/te
Read my write-ups about TE and they should help you if you havent already
#17
Re:Prolly going TE! help me out..
Hey xenocron! can you check out my basemap and see if i did it right??
EDIT: sent you an email! should be from draztikracing@yahoo.com
EDIT: sent you an email! should be from draztikracing@yahoo.com
#20
Re:Prolly going TE! help me out..
also can someone pull the link to the ecu chipping kit where i can just swap in and out chips?! i'll probably get the willem burner!
also from the willem page http://www.willem.org/epromshop.html
which burner should i get??
EDIT: just got this:
http://cgi.ebay.com/ws/eBayISAPI.dll...e=STRK:MEWN:IT
copying teg...
now wheres those chips?? are they one ebay too? are they 28 pin?
also from the willem page http://www.willem.org/epromshop.html
which burner should i get??
EDIT: just got this:
http://cgi.ebay.com/ws/eBayISAPI.dll...e=STRK:MEWN:IT
copying teg...
now wheres those chips?? are they one ebay too? are they 28 pin?