HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Engine Management (https://www.homemadeturbo.com/engine-management-10/)
-   -   problems with VAFC (noob on the Apexi system) (https://www.homemadeturbo.com/engine-management-10/problems-vafc-noob-apexi-system-77910/)

HMTguy 05-18-2007 03:09 PM

Re: problems with VAFC (noob on the Apexi system)
 
Do you understand that you shouldn't be using check valves with your vafc?

Read the engine management faq.

zeroburns69 05-19-2007 07:27 PM

Re: problems with VAFC (noob on the Apexi system)
 
no i did not know that cause from what i had understand you do not use the check valves if you wire up the MAP to the TPS cable on the apex i from what i had read in the tovt forums :X

HMTguy 05-19-2007 07:39 PM

Re: problems with VAFC (noob on the Apexi system)
 
Don't talk anymore until you read all of this

https://www.homemadeturbo.com/forum/...?topic=14497.0

zeroburns69 05-21-2007 01:13 AM

Re: problems with VAFC (noob on the Apexi system)
 
i had already read the FAQ but thank you anyway.... did not help me out to much as to the post i wrote bere here is where i got the idea from :

http://www.honda-tech.com/zerothread?id=137901&page=1

but yet again you do use check valves on the Apexi i wired it directly with no checkvalves like it said there he did and i still got my CEL for Hi voltage map/baro sensor.

HMTguy 05-21-2007 02:39 AM

Re: problems with VAFC (noob on the Apexi system)
 
You dumb sack of ----.

imburne 05-21-2007 03:44 AM

Re: problems with VAFC (noob on the Apexi system)
 
Hey be polite.. Say caca.. You dumb piece of caca.

davcivic 05-23-2007 01:39 PM

Re: problems with VAFC (noob on the Apexi system)
 
Hey bro, you are not supposed to use the check valves with the AFC......Take them out, check your wiring and go from there.

assh0l3 05-24-2007 08:01 AM

Re: problems with VAFC (noob on the Apexi system)
 
I've got an AFC with a 2 bar map sensor. The stock injecotrs were 155's and Im using 315s not. Fine to 10 psi anyways, at least on my car (1992 Tercel).

Ta Da, plug in 2 bar map for Toyota
http://memimage.cardomain.net/member...5_117_full.jpg

d16ysoslo 05-24-2007 09:25 AM

Re: problems with VAFC (noob on the Apexi system)
 

Originally Posted by AstroVannin
I've got an AFC with a 2 bar map sensor. The stock injecotrs were 155's and Im using 315s not. Fine to 10 psi anyways, at least on my car (1992 Tercel).

Ta Da, plug in 2 bar map for Toyota
http://memimage.cardomain.net/member...5_117_full.jpg

I hope you whole car doesn't have as many zip-ties as this little section does.

assh0l3 05-25-2007 07:45 AM

Re: problems with VAFC (noob on the Apexi system)
 
Nah, thats about the worst of it. The vacuum tees I had were a little too small so I put them on there just to make sure they wouldnt come off. Seems ot be working, but I should probably just get some new vcuum tees.

However, the rad is secured with zip ties too.


All times are GMT -5. The time now is 09:45 AM.


© 2024 MH Sub I, LLC dba Internet Brands