problems connecting burn1 to crome
 

Crome 1.2.5, free version

Everything is set to match up, com port(2), latency, baud, etc..

Added rtp, disabled checksum. Even used a stock bin to see if it was my bin. Nothing.


It says it cant find it after performing 3 tests, 250ms between each.

My burn1 works fine, i burned a chip earlier without a problem. I duno what to do.

I've done it on my other computer before, don't know why it won't let me do it on this one. All other plug ins work just fine. >:(

Re: problems connecting burn1 to crome
 

This is really starting to ------- piss me off!

I've tried every ------- com(1-4) port, every baud. I have both the device manager and crome set exactly the same. I've tried opening and closing crome MANY times. I've unlplugged and plugged my burn1 many ------- times too!! It's just ------- pissing me off!!

Re: problems connecting burn1 to crome
 

Uh, what exactly are you trying to accomplish by "hooking the Burn1 up to Crome"?

In order to use RTP you will need an emulator like an Ostrich.

Unless I am mistaken you can only burn a chip with the Burn1 through Flash and Burn.

:-\

Re: problems connecting burn1 to crome
 

no, I've burned chips with crome before. It's just a little faster.

Also, I have an ostrich that i'll be hooking up also. I just don't have it on me at the moment. Hopefully it doesnt do this when i try to hook that up.