HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Engine Management (https://www.homemadeturbo.com/engine-management-10/)
-   -   Poor AFR (https://www.homemadeturbo.com/engine-management-10/poor-afr-89922/)

91talon27 03-26-2008 10:03 PM

Re: Poor AFR
 
What is your AFR at idle? How about under full boost? Anything under 32% throttle will use the low throttle settings to adjust your AFR anything above 70% will use your high throttle settings. Anywhere in between 32% and 70% will calculate the difference between the throttle settings at the percentage of throttle you are at. You want to be at or near 14.7 at idle. It will fluctuate as the ecu will try to compensate for it to be at 14.7. At full boost you want to be around 10.5 to 11.0 this for a conservative tune. I hope this helps.

Birdley42008 03-26-2008 10:07 PM

Re: Poor AFR
 
Im waiting on an ecu from xenocron. I dont have a wideband so I dnt know my exact afr.

91talon27 03-26-2008 10:27 PM

Re: Poor AFR
 
I would suggest saving up to get a wideband as they are a must have. I am willing to bet you are running extremely lean under boost as I was running around -28 to -30 tunning Pte 780cc injectors before I went with a chipped ecu. But I also have a AWD DSM.

Birdley42008 03-26-2008 11:28 PM

Re: Poor AFR
 
I was actually running rich. I dont personally have a wideband but when it was on the dyno it was a straight 11.0 :6

91talon27 03-27-2008 09:20 AM

Re: Poor AFR
 
Under boost you are shooting for 11:1 as a conservative/safe tune. So your are pretty much where you should be under boost.


All times are GMT -5. The time now is 08:16 PM.


© 2024 MH Sub I, LLC dba Internet Brands