Re: PLX Device Voltages vs. AFR
 

But as far as sending the voltages to the ECU

Do I just input the 0-5volt signal through C16(Stock o2), disable the o2 sensor in my TE code so it stays in open loop and set the Pluggin for ECUControl to the PLX Device instead of the Stock Device?

Re: PLX Device Voltages vs. AFR
 

Yes, connect it to stock O2 location,and disable O2 in the ROM.

As far as ECUControl.. I do'nt know, I don't use it.

Re: PLX Device Voltages vs. AFR
 

Thanks man, I'll have to give this a try.

Also then

What does the Almighty TurboEF9 Use?

Re: PLX Device Voltages vs. AFR
 

I wrote my own datalogger, of course. :)

Re: PLX Device Voltages vs. AFR
 

Damn to be a Genius!

Re: PLX Device Voltages vs. AFR
 

You know J. Parker gets all the ladies with his madd coding skeeelz :-X

Re: PLX Device Voltages vs. AFR
 

Yes this works. I log as a PLX device, then save to Excel.

I wrote a Macro to Convert, It corrispond within 3 decimal Places to my Digital Voltmeter.

I haven't used it to tune yet, but at idle and rev in the shop it works.

Re: PLX Device Voltages vs. AFR
 

Good work! ...is this somethign you can post and share for others?

Re: PLX Device Voltages vs. AFR
 

Will do later.

Re: PLX Device Voltages vs. AFR
 

Would anyone Really be interested in the Macro and The instructions for this. It is a little in depth, as I don not know how many people know how to write Macros and use trendlines.

Seeing as every WB is different and I only know of the DIY and AEM one being non-linear.