Which pinout on ECU?
03-19-2005, 05:55 PM
#1
3.0 BAR
Thread Starter
Join Date: Apr 2004
Posts: 9,800
Which pinout on ECU?
Wiring Zeitronix wideband.
Need the pinout for rpm signal
Already found TPS, which was D11
Anyone know which one it is?
http://honda-tech.com/zerothread?id=1171263
I've been looking at that but I'm not seein it
Need the pinout for rpm signal
Already found TPS, which was D11
Anyone know which one it is?
http://honda-tech.com/zerothread?id=1171263
I've been looking at that but I'm not seein it
03-19-2005, 06:24 PM
#4
1.0 BAR
Join Date: Jan 2004
Posts: 199
Re: Which pinout on ECU?
Originally Posted by ****
Originally Posted by tranceminister
What ecu?
but p28 if you must
http://www.apexi-usa.com/productdocu...AFC2Wiring.pdf
03-19-2005, 06:25 PM
#5
3.0 BAR
Thread Starter
Join Date: Apr 2004
Posts: 9,800
Re: Which pinout on ECU?
Originally Posted by Jigga man
Originally Posted by ****
Originally Posted by tranceminister
What ecu?
but p28 if you must
http://www.apexi-usa.com/productdocu...AFC2Wiring.pdf
03-19-2005, 08:42 PM
#10
3.0 BAR
Join Date: Mar 2003
Posts: 5,282
Re: Which pinout on ECU?
I'm assuming he cut it for some reason. Just replace it with a spare resistor leg or if your like me and end up cutting the excess off, use a piece of that. Unless you can re-join the old jumper with some solder 
