OMNI 4 bar MAP sensor. some questions....
#14
Guest
Posts: n/a
Re: OMNI 4 bar MAP sensor. some questions....
Originally Posted by xenocron
If you are using Crome...use the XENOCRON 4.0 Bar setting when adding Boost Tools.
its the same sensor as the Motorola 4 bar I sell
its the same sensor as the Motorola 4 bar I sell
#18
Re: OMNI 4 bar MAP sensor. some questions....
Plug everything in and turn the car to ON positions (KOEO)
Measure the voltage for the MAP sensor signal wire...should be 1.3 volts...or thereabouts I think.
Make sure you arent plugging the map sensor into the TPS plug...
Measure the voltage for the MAP sensor signal wire...should be 1.3 volts...or thereabouts I think.
Make sure you arent plugging the map sensor into the TPS plug...
#19
Guest
Posts: n/a
Re: OMNI 4 bar MAP sensor. some questions....
Originally Posted by xenocron
Plug everything in and turn the car to ON positions (KOEO)
Measure the voltage for the MAP sensor signal wire...should be 1.3 volts...or thereabouts I think.
Make sure you arent plugging the map sensor into the TPS plug...
Measure the voltage for the MAP sensor signal wire...should be 1.3 volts...or thereabouts I think.
Make sure you arent plugging the map sensor into the TPS plug...
#20
Guest
Posts: n/a
Re: OMNI 4 bar MAP sensor. some questions....
got it fixed!!! for some odd reason crome ver. 1.4.8 was bugged out on my lappy. reinstalled 1.4.8 and viola omni 4 bar works, and idles great on xenocron 4 bar setting!! thanks for input guys!! 20 psi here i come woohoo