odb-1 convertion question ??????
 

ok, my cousin has a y7 and is wondering when he switches to odb-1 if he need to use the p06 from a 92-95 1.5 and get it "turbo" chipped?????


is this possible????? is it the best route??????

Re:odb-1 convertion question ??????
 

you might wanna post up what car this is going into.

Re:odb-1 convertion question ??????
 

97 lx with a jumper harness??????????????


just wondering why it would matter what it is in??????

Re:odb-1 convertion question ??????
 

He needs a conversion harness, P06 ecu and he needs to convert to a 2 wire IAC valve.

Re:odb-1 convertion question ??????
 

if i use a chipped p28. do i still have to do a 2 wire convertion???????????????????


is there a write up on this??????????

Re:odb-1 convertion question ??????
 

okay a little confused here.

So lemme get this straight, he had a 97 Civic LX with the Y7 and wants to convert to OBD1... could I ask for what reason?

I thought you were trying to do a swap into an 'EG' or 'EF', that's why I asked what car. But you/he just wants use the OBD1 ecu?

Or does he want to convert to OBD1 just to use a chipped ecu? If that is the case and the only reason why he wants to convert, I say don't bother. In my opinion the cost to benifit ratio is not worth it. Unless he's gonna go but a turbo or what not on it, then it would be worth it to convert.

Re:odb-1 convertion question ??????
 

yea he is goinh turbo he is just tring to figure out what ecu to chip to do this

Re:odb-1 convertion question ??????
 

why all the question marks? one will do just fine!

Re:odb-1 convertion question ??????
 

he can use a number of obd1 ecu's if it's going to be chipped, but if it's not chipped, yes, he needs a p06, and yes, he has to do the 2 wire iacv conversion no matter what, but there's an easy way around it. biggmike posted a link for it somewhere, all you have to do is swap some wires so that the ecu actually thinks the 3 wire iacv is a 2 wire.