OBD2 -> OBD1 conversion HELP!!!
Ok, my last freakin idea.
My buddy was saying that on an Auto obd2 car, the IACV is a 4 wire, where as on an obd1 car it is a three wire, and that I would need to convert to complete the conversion. Im trying to run a chipped p06 with uberdata. Anyone else have this problem, and if you know about this, help me out PLEASE!!! I wanna drive my car... :'( |
Re: OBD2 -> OBD1 conversion HELP!!!
block off the iacv, and run it. you'll get a cel, but the car will still run fine. easy solution so you can drive it until you get all the stuff for the iacv conversion. and i believe that the obd2 is a 3 wire, and the obd1 is a 2 wire. ;)
|
Re: OBD2 -> OBD1 conversion HELP!!!
obd2 auto is 3 wire, and obd1 is 2 wire. if you have a y7, i believe you have to swap out the whole intake mani for a y8 in order to do the conversion, however, this isn't your problem. if the iacv was your only problem, you would simply get a cel code 14 and the car would still run fine, it would just have a fluctuating idle.
|
Re: OBD2 -> OBD1 conversion HELP!!!
Originally Posted by projekteg
obd2 auto is 3 wire, and obd1 is 2 wire. if you have a y7, i believe you have to swap out the whole intake mani for a y8 in order to do the conversion, however, this isn't your problem. if the iacv was your only problem, you would simply get a cel code 14 and the car would still run fine, it would just have a fluctuating idle.
|
Re: OBD2 -> OBD1 conversion HELP!!!
I did the Y8 swap on my Y7. You have to have a Y8 manifold from a Stick car not an auto. Auto still had the TB mounted IAC valve. Then you have to do the 3 wire to 2 wire conversion.
|
Re: OBD2 -> OBD1 conversion HELP!!!
Originally Posted by Paul99EX
i have a y8. but damnit....think maybe then it is my dizzy?
|
Re: OBD2 -> OBD1 conversion HELP!!!
Originally Posted by projekteg
Originally Posted by Paul99EX
i have a y8. but damnit....think maybe then it is my dizzy?
|
Re: OBD2 -> OBD1 conversion HELP!!!
Originally Posted by Paul99EX
Originally Posted by projekteg
Originally Posted by Paul99EX
i have a y8. but damnit....think maybe then it is my dizzy?
Eliminate the conversion harness as a variable or do you have to use the convo harness with his car too? |
Re: OBD2 -> OBD1 conversion HELP!!!
yea obd 2 is 3 wire .. obd1 is 2 wire, darksols right , just get some waterpump gasket ---- or a pop can .( then tend to leak) block of you iacv. its 4 screws like 2 clamps for the coolant hoses . car wont idle as goofy as with out it blocked of but its s cheap solution.. im goin on 2- 3 months with out swapin my y8 mani ..lol
|
All times are GMT -5. The time now is 06:29 AM. |
© 2024 MH Sub I, LLC dba Internet Brands