o rings for fuel injectors
 

I need 4 o rings that seal the fuel injectors to the manafold. does anyone have these for sale or know where i can get them?

Re:o rings for fuel injectors
 

NAPA sells an injector seal kit for $10 each.

You're looking for 92-95 D16Z6 seals if you plan on using DSM 450s. IF you already have a D16Z6, then you already have the seals you need... probably won't have to buy them.

I can't remember what motor you had with that S/C.

Re:o rings for fuel injectors
 

its a 99 civic si engine. i got 440 injectors, but the o rings werent sent for some reason, so i need to find somewhere to buy them asap. Would orilly's or pep boys have them?

Re:o rings for fuel injectors
 

O'Reilly's might.. I don't have a Pep Boys around here, so I've never tried to buy parts form them..

Re:o rings for fuel injectors
 

so the seal kit that napa has is what i need?
Ill have to make some calls tomorrow.
do you know anywhere online that might have them?

Re:o rings for fuel injectors
 

And is the seal kit just for one injector? So the seals are gonna cost almost as much as the injectors?

Re:o rings for fuel injectors
 

dude.... just go to the Junkyard and look for an Acura with a b18.... those injector seals work too..... thats what i used... and best of all they were free.....

Re:o rings for fuel injectors
 

dude, geta dremel, if u don't have one borrow one and bore it out, make sure you clean all the resedue from the stock seals b4 sliding them into the manifold.took me 1 min to bore each on out to fit perfect. not too tight just perfect.

Re:o rings for fuel injectors
 

If you get the Napa kit, you will need to buy a todal of 4 kits. And dremel them larger. Mine were about 13$ Cad a set.

I'd prefer to use the new seals, over a crusty used set of seals.

Re:o rings for fuel injectors
 

I did not have to dremel mine, on a b16 with stock seals and dsm 450cc, all I did was install the seals on the injectors put them in the fuel rail, put some oil on the seals, and bolt the fuel rail down with 1-2 torgue patern so they get equal torque. no dremel you might make them too big.

Re:o rings for fuel injectors
 

Anyone know about the y8? I've went to the napa site and punched in the part number given in "tech projects" but it didn't come up with anything. I'm gonna use 2gen 450's in my y8.

Re:o rings for fuel injectors
 

stealth i just dremeled out the stockers. works mint

Re:o rings for fuel injectors
 

just make sure the overall amount that the injector sticks into the manifold is the same after you change the injectors, some seals are taller than others.

Re:o rings for fuel injectors
 

wtf guys,. this is HMT, use some dammn silicon!

haha nah, just be sure they aren't too loose otherwise you'll get a vac leak from them and your car will do all sorts of weird stuff.

Re:o rings for fuel injectors
 

just lubed them and force them in, works for me.
;D