non chiped ecu
03-22-2006, 05:38 PM
#1
0.0 BAR
Thread Starter
Join Date: Dec 2005
Posts: 18
non chiped ecu
i have a great problem that because my country is very poor in info about turbo . for example iam the first one install turbo in my city. i read and read and buy and buy .
i have problem that can not do the fuel managment for me . i need and expert in turbo to tell me what shall i do to get the best power saving my engine
- my engine id d15b vtec jdm
- t3/t4
- non chiped p08 and non chiped p28
-some cheap chip (20$) from ebay but i dont know how to install and iam afraid to damage my ecu
- walpro fuel pump
-fmu blox 1:12
-450 dsm injectors
- missing link
so can any expert arrange me my fuel managment
i read about the fmu and it damage the engine.
and i read about the afc which i did not have.
so helppppppppppppppppp
i have problem that can not do the fuel managment for me . i need and expert in turbo to tell me what shall i do to get the best power saving my engine
- my engine id d15b vtec jdm
- t3/t4
- non chiped p08 and non chiped p28
-some cheap chip (20$) from ebay but i dont know how to install and iam afraid to damage my ecu
- walpro fuel pump
-fmu blox 1:12
-450 dsm injectors
- missing link
so can any expert arrange me my fuel managment
i read about the fmu and it damage the engine.
and i read about the afc which i did not have.
so helppppppppppppppppp
03-22-2006, 08:14 PM
#2
Guest
Posts: n/a
Re: non chiped ecu
Get your ecu chipped. It's not that expensive to get it chipped here in the states and have it sent back to you. Or if you are worried about downtime, just buy an already chipped one from Xenocron, and then send him yours when you are done and he will buy it from you. Ditch the chip you have. Ditch the fmu, unless you want to blow up your motor.
Where ya from?
Where ya from?
03-23-2006, 05:16 AM
#5
3.0 BAR
Join Date: Jul 2004
Posts: 4,029
Re: non chiped ecu
You install the injectors and pump and sell the FMU and the missing link.You need that money to buy a wideband sensor so you can hook it up and read the air/fuel ratio and make adjustments via the engine management program you are using on the chipped ecu.Once you get it figured out you can charge everybody to tune there ---- and help pay for all the stuff you bought.
03-23-2006, 08:35 AM
#9
Guest
Posts: n/a
Re: non chiped ecu
A chipped ecu and a wideband is ALWAYS better than a vafc.
The wideband sensor is installed in an O2 bung usually a little bit after the turbo.
Check out www.------------- he has a whole package that will get you everything you need to get started.
The wideband sensor is installed in an O2 bung usually a little bit after the turbo.
Check out www.------------- he has a whole package that will get you everything you need to get started.
