Newly aquired knowledge=dumb questions...
Ok, since the TE online class turned into some weird ---- I couldn' understand, I couldn't ask my noob questions without feeling retarded.
So, let's say I have a "bin" that was made for my motor with a perfect tune that runs super duper great. The bin was made for 440cc injectors. Now, if I wanted to use 450cc injectors and use the same "bin", I could just subtract 2.274%(the difference between the 440cc and the 450cc injectors)from the fuel maps to compensate for the added volume and the map would run the same as it did before with the 440cc injectors, correct? The timing maps would all be the same because I didn't touch them, correct? Is this logical? One more question: The "properties" section does not transfer from bins, correct? So my properties would stay the same and not change when I open new bins, right? Only the fuel/ignition tables transfer and the rest stays the same? I would have my own set of properties for my setup(rev limits, injector size..etc...etc).....and when I open a new bin, the properties don't come with it so I don't know what the rev limit, injector size, etc...etc was. ??? __________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Re:Newly aquired knowledge=dumb questions...
Originally Posted by Dr.Boost
So, let's say I have a "bin" that was made for my motor with a perfect tune that runs super duper great. The bin was made for 440cc injectors. Now, if I wanted to use 450cc injectors and use the same "bin", I could just subtract 2.274%(the difference between the 440cc and the 450cc injectors)from the fuel maps to compensate for the added volume and the map would run the same as it did before with the 440cc injectors, correct? The timing maps would all be the same because I didn't touch them, correct? Is this logical?
One more question: The "properties" section does not transfer from bins, correct? So my properties would stay the same and not change when I open new bins, right? Only the fuel/ignition tables transfer and the rest stays the same? I would have my own set of properties for my setup(rev limits, injector size..etc...etc).....and when I open a new bin, the properties don't come with it so I don't know what the rev limit, injector size, etc...etc was. ??? Properties are associated with the actual roms themselves. So lets say you open the ng4.bin and you change some things and save it as your own bin (booststightasstune.bin) , then you retain the properties of the ng4.bin if you didn't change them. But if you go and open up the stable.bin, which is a totally different rom, it may have different properties. I think this is correct. |
Re:Newly aquired knowledge=dumb questions...
Originally Posted by Dr.Boost
The "properties" section does not transfer from bins, correct?
|
Re:Newly aquired knowledge=dumb questions...
Bin files are what you burn to the chip. so all the properties are saved, it's the .Exp files that are naked(maps only)
thanks TE tunning class! |
Re:Newly aquired knowledge=dumb questions...
The properties shouldn't be all that hard to remember anyway, right? it's just launch, cold & hot rev limits that work at this point?
I would just work on getting the map down, then go in and make sure those three things are where you want them, and burn. ??? |
Re:Newly aquired knowledge=dumb questions...
Yes... .bin files should not be shared between people.
Only share your .exp files.. This will insure that people have nice tunes, and can retain thier personal settings. |
All times are GMT -5. The time now is 10:10 PM. |
© 2024 MH Sub I, LLC dba Internet Brands