HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Engine Management (https://www.homemadeturbo.com/engine-management-10/)
-   -   Need Some Help with Engine management (https://www.homemadeturbo.com/engine-management-10/need-some-help-engine-management-74480/)

1993ferio Feb 25, 2007 10:39 PM

Need Some Help with Engine management
 
Im goin to be running a 8psi custom setup before i get to the install i need to know what i should use. my questions are.

Should i just use FMU or...

should i chip my ecu. i also need a little more insight on chipped ecus. let me get this straight. to chip it i would have to buy the chips, and a chip programmer, and have the romburning software on my comp to make maps right?

is there any other ways?

nonvtec Feb 26, 2007 05:05 PM

Re: Need Some Help with Engine management
 
Yes, you need a chip burner ($85) and some chips and then download uberdata or crome which are free and you can start chipping. If you've never done it before you should go read the tutorial at pgmfi.org and go to the uberdata forums and learn how to make a basemap.

1993ferio Feb 27, 2007 01:39 AM

Re: Need Some Help with Engine management
 
thanks, i could also buy one that already has a basemap on it right? i think i was searching and saw that stealthmode wil put one on it for you and its something like $3 more than a reg chip. is that right?

HMTguy Feb 27, 2007 01:54 PM

Re: Need Some Help with Engine management
 
You'll still need a chip burner. Personally I wouldn't use a basemap for more than a day or so.

1993ferio Feb 27, 2007 03:05 PM

Re: Need Some Help with Engine management
 
thanks. im goin to be buyin moates burn1 here in a couple days then.

1993ferio Feb 27, 2007 03:30 PM

Re: Need Some Help with Engine management
 
i had another question then. what should i do about timing? just retard at the distributor?

MAJORAHOLE Feb 27, 2007 03:37 PM

Re: Need Some Help with Engine management
 

Originally Posted by jagojon3
You'll still need a chip burner. Personally I wouldn't use a basemap for more than a day or so.

unless your me, and use it for 700mi. O0

reactone Feb 27, 2007 05:06 PM

Re: Need Some Help with Engine management
 

Originally Posted by 1993ferio
i had another question then. what should i do about timing? just retard at the distributor?

Dude, you got a lot of reading to do. 250cc of pgmfi.org, stat!
Also, if you plan on tuning, you'll need a wideband o2 sensor as well as a laptop to datalog. Then you'll need a means of datalogging, unless you run crome pro or uberdata. crome may be a bit more user friendly.
To answer your original question, timing can be adjusted in the tuning software. Now go read!!

nonvtec Feb 27, 2007 11:10 PM

Re: Need Some Help with Engine management
 

timing can be adjusted in the tuning software. Now go read!!

1993ferio Feb 27, 2007 11:40 PM

Re: Need Some Help with Engine management
 
gettin moates burn1 for sure.. seems like the only way to go.


All times are GMT -5. The time now is 05:22 AM.


© 2026 MH Sub I, LLC dba Internet Brands