|
need help tuning turboedit, or evans-tuning? car almost done w/ tons of pics
basically, i built my d16a1 motor for my 87 crx dx with a ton of help with a couple friends. im pretty much afraid of tuning turbo edit myself just because i don't really understand the whole program. i don't want to blow the damn thing up just because all of the money i dumped into it. should i try to find local help around King of Prussia, PA, or should i just go to evans tuning to get it done? can anyone around here help me? i chipped my pm6 ecu with datalogging capability via parts from chromes website and also bought a plx-m300.
i still have a couple weeks until i have the motor in the car, and it still has to go through break in. i will pay if the person knows what they are doing. anyways, after a year of hard work, im stoked that this damn thing is almost done, and hopefully i can take it to maple grove before it closes... car has as follows: head: port/polished d16a1 head 2g zc intake mani bored to 60mm b18b 60mm tb tb spacer hks metal gasket *EDIT* also delta reground turbo cams JG adj. cam gears block: braced block custom wiseco 9:1 pistons tt rods fully rebuilt bored out oil pump turbo/exhaust: rebuilt svo t3 .48/.60 tsunami turbo mani /dump ss 35mm wastegate custom 2.25 & 2.5" piping knockoff type s bov cca 6" intercooler sfp 2.5" dp 2.5" exhaust with elec cutout fuel/electronics: chipped pm6 w/ datalogging plx-m300 safc..useless, but maybe break in motor with hack electronic gauge conversion edm black headlights/corners rare tail light center tranny: d16a1 tranny rebuilt with installed obx lsd clutchmasters stage 3 suspension: monkeyztech custom 1g 450lb coilovers upgrademotoring 27.5mm torsion bars kyb struts sorry for the shitty phone pics... old setup..i got rid of manifold, turbo, intercooler, and motor spun a bearing http://i4.photobucket.com/albums/y13...mbr/engine.jpg rebuillt/finished motor http://i4.photobucket.com/albums/y13...hmbr/d16a1.jpg lsd installed http://i4.photobucket.com/albums/y13.../Jun11_006.jpg edm digital gauge cluster http://i4.photobucket.com/albums/y13...chmbr/digi.gif slicks on vx rims http://i4.photobucket.com/albums/y13...hmbr/slick.jpg front of crx w/ edm headlights/corners http://i4.photobucket.com/albums/y13...hmbr/front.jpg rare tail center http://i4.photobucket.com/albums/y13...br/crxback.jpg dash w/ tenzo wheel and horn http://i4.photobucket.com/albums/y13...hmbr/dash2.jpg motor http://i4.photobucket.com/albums/y13.../Mar25_001.gif http://i4.photobucket.com/albums/y13.../Mar25_002.gif greddy oil adapter http://i4.photobucket.com/albums/y13.../Mar25_004.gif before holes drilled http://i4.photobucket.com/albums/y13.../Feb17_005.jpg chipped datalogged pm6 http://i4.photobucket.com/albums/y13.../Feb18_005.jpg http://i4.photobucket.com/albums/y13...r/crxdata2.jpg |
Re: need help tuning turboedit, or evans-tuning? car almost done w/ tons of pics
that's one sick setup in that chassis. me and my bro have an 86 crx and was thinking of doing a similar setup with a b18a1.
|
Re: need help tuning turboedit, or evans-tuning? car almost done w/ tons of pics
Evans doesnt tune TurboEdit as far as I know...
I'm not terribly far from King of Prussia, maybe 2 hours give or take and I have been tuning TE for a while, but you may be better off converting to OBD1 for more options and better tunability any way. |
Re: need help tuning turboedit, or evans-tuning? car almost done w/ tons of pics
i have owned a 1st gen crx for 5 years. the first one i was planning on doing a built ls/vtec turbo, but for money savings, i slapped a turbo on a d16a1 swap. that thing was fast as hell till the stock clutch failed and a spun a bearing due to an oil leak i didn't know about....whoops. even with the screwed clutch, i beat a 91 civic hatch w/ b16 swap and a 75-100 shot.
anyways, after it screwed up, my friends made fun of me for building a d16a1. i decided to show them that they can make power, and im hoping to beat their swapped cars....fuckers! haha |
Re: need help tuning turboedit, or evans-tuning? car almost done w/ tons of pics
I love it >:D.
|
Re: need help tuning turboedit, or evans-tuning? car almost done w/ tons of pics
Originally Posted by xenocron
you may be better off converting to OBD1 for more options and better tunability any way.
|
Re: need help tuning turboedit, or evans-tuning? car almost done w/ tons of pics
if i can find a decent obd1 ecu and obd1 dohc zc dizzy for a decent price, than maybe...but for now, i want to run this pig as is. pretty much already dumped enough money into it
|
Re: need help tuning turboedit, or evans-tuning? car almost done w/ tons of pics
also, since this is a completely fresh motor, i know i have to break it in. should i just drive around in low boost stock, with the hack, or break it in without the turbo?
|
Re: need help tuning turboedit, or evans-tuning? car almost done w/ tons of pics
hell! where did you get that cluster?
|
Re: need help tuning turboedit, or evans-tuning? car almost done w/ tons of pics
Originally Posted by staticchmbr
also, since this is a completely fresh motor, i know i have to break it in. should i just drive around in low boost stock, with the hack, or break it in without the turbo?
|
Re: need help tuning turboedit, or evans-tuning? car almost done w/ tons of pics
Originally Posted by Walter
hell! where did you get that cluster?
|
Re: need help tuning turboedit, or evans-tuning? car almost done w/ tons of pics
https://i4.photobucket.com/albums/y1...chmbr/digi.gif
Jesus tittyfuck, thats is the hottest thing Ive ever seen. and I love 1G CRX's. |
Re: need help tuning turboedit, or evans-tuning? car almost done w/ tons of pics
Originally Posted by staticchmbr
cluster is VERY VERY rare. its from the european market. got this off of someone online for about $200-$250
|
Re: need help tuning turboedit, or evans-tuning? car almost done w/ tons of pics
Try philly dyno works, I think they tune turboedit...... www.phillydynoworks.com
|
| All times are GMT -5. The time now is 04:57 PM. |
© 2024 MH Sub I, LLC dba Internet Brands