msd inline fuel pump
#5
Re:msd inline fuel pump
just like servicing a fuel pump. You have to remove parts in the rear of the car to get to it. On the del sol we tear out our cabin ----, and its below the rear boxes, with an odd shape almost like a really large wastegate shape if you will.
Remove the retainer bit, and then undo some bolts, pull the pump out, connect the new one, and repeat.
I'd suggest looking at a service manual for your car to get the exact order of operations.
Remove the retainer bit, and then undo some bolts, pull the pump out, connect the new one, and repeat.
I'd suggest looking at a service manual for your car to get the exact order of operations.
#6
Re:msd inline fuel pump
Inline fuel pumps you just cut the stock line and put it in.. then wire up a 12v ign wire and a ground. you can either mount it on the firewall or under the car. It should be a fairly quick install for you. I would get enough rubber line that you can over lap the steel a few inches so there is plenty of seal
Thread
Thread Starter
Forum
Replies
Last Post
hotrex
Engine Management
2
07-21-2003 10:01 AM