motorola 2.5bar, starts and then dies
The setup is a z6 vitara build. It's been running on a gm 3bar find. But thing is, it's a borrowed map sensor. Now he plugged in a motorola 2.5 bar.
I made a new bin, scaled everything correctly and selected the 2.5bar in adv boost tools. The car will idle fine, and after about 10-15 seconds, it will go lean and die. It throws a code 5, map sensor. It's wired correctly and starts up perfectly. I dont' know whats going on? The only thing I could see that's bad is either I burned out the map sensor when i soldered the wires on there or the vacuum line that's going to the map sensor isn't completely sealing around the fitting and has a slight leak. But it idles perfect for 10-15 seconds. :S |
Re: motorola 2.5bar, starts and then dies
what does it read when you turn the key to acc ? how much vac/boost ? my read like 22psi. lol |
Re: motorola 2.5bar, starts and then dies
It was reading -20 in/hg
|
Re: motorola 2.5bar, starts and then dies
i couldnt figure out my either. i changed the wires around every which way but still couldnt get it to work. all i did was, replaced the moto 2.5 sensor and everything worked as it should. sorry i couldnt be of more help. :-\ |
Re: motorola 2.5bar, starts and then dies
Bump for more help.
We had to swap back to a stock map to get his ---- running. 11psi sucks :3 We want 22 :y >:D |
Re: motorola 2.5bar, starts and then dies
I would say the sensor is bad if you know it's wired up correctly and it's still throwing a code.
I can send you my bin if you want to try it, it's a z6 vitara build on 660's w/ the same map sensor. |
Re: motorola 2.5bar, starts and then dies
I'd appreciate it. If anything, it should run a LITTLE lean.
email is d112crzyATmsn.com |
Re: motorola 2.5bar, starts and then dies
Emailed you.
|
Re: motorola 2.5bar, starts and then dies
what version of crome was that made with?
|
Re: motorola 2.5bar, starts and then dies
I had the same prob with the moto 2.5bar, I went through a coupple sensors before saying ---- it, and going back to the stocker. I'll just man up and buy the gm3bar.
|
Re: motorola 2.5bar, starts and then dies
Originally Posted by d112crzy
what version of crome was that made with?
|
Re: motorola 2.5bar, starts and then dies
2 Attachment(s)
I got this idea from pgmfi
I took an old ass serial cable I had laying around the house and took the pins out Attachment 20972 Attachment 20973 I soldered one side to wires and the other side slides onto the map sensor, kinda like a plug. Hoping the map sensor isn't defective, this should work. |
Re: motorola 2.5bar, starts and then dies
Good Idea, let us know how it works
|
All times are GMT -5. The time now is 08:32 AM. |
© 2024 MH Sub I, LLC dba Internet Brands