Go Back  HomemadeTurbo - DIY Turbo Forum > Homemadeturbo > Engine Management
moates/xenocron 2Timer/2-step...how to use? pics inside >

moates/xenocron 2Timer/2-step...how to use? pics inside

Engine Management eCtune , Crome , AFC , FMU , Zdyne , Hondata , EMS , TE , Uberdata Anything to control your fuel, spark needs!

moates/xenocron 2Timer/2-step...how to use? pics inside

Old 02-20-2006, 01:08 PM
  #1  
1.0 BAR
Thread Starter
 
Join Date: Mar 2004
Posts: 609
Default moates/xenocron 2Timer/2-step...how to use? pics inside

juat bought the 2-step and installed it into my ecu to run with turbo edit on my pm6. it has 1 blue wire coming out..where does that go? does it just go to a switch thats grounded out? i also bought a bunch of 27SF512 chips..how would i go about burning 2 programs to them, and switching between them? sorry about the shitty phone pics.


staticchmbr is offline  
Old 02-20-2006, 02:08 PM
  #2  
1.0 BAR
 
Join Date: Apr 2004
Posts: 240
Default Re: moates/xenocron 2Timer/2-step...how to use? pics inside

Yah, just run that line to a switch and then the switch to ground.

You'll then need a program to "stack" the maps together into one, so that the Burn1 software can just load it up. I've been thinking about asking craig to include a stacking option in the burn1 software... I wonder if they'd do it... I haven't burnt one yet, but I would probably use Tunerpro RT to stack it, then save it and burn it with my burn1.... unsure if it works though
splitime is offline  
Old 02-20-2006, 02:52 PM
  #3  
1.0 BAR
 
Join Date: Jun 2003
Posts: 357
Default Re: moates/xenocron 2Timer/2-step...how to use? pics inside

Just curious, can you switch between the two programs with the car running?
crx-t is offline  
Old 02-20-2006, 03:05 PM
  #4  
1.0 BAR
Thread Starter
 
Join Date: Mar 2004
Posts: 609
Default Re: moates/xenocron 2Timer/2-step...how to use? pics inside

your supposed to be able to...

so where do i get the burn1 and Tunerpro RT software?
staticchmbr is offline  
Old 02-20-2006, 03:29 PM
  #5  
1.0 BAR
 
Join Date: Jan 2005
Posts: 425
Default Re: moates/xenocron 2Timer/2-step...how to use? pics inside

Originally Posted by staticchmbr
your supposed to be able to...

so where do i get the burn1 and Tunerpro RT software?
www.moates.net
93turbo16 is offline  
Old 02-20-2006, 06:35 PM
  #6  
1.0 BAR
Thread Starter
 
Join Date: Mar 2004
Posts: 609
Default Re: moates/xenocron 2Timer/2-step...how to use? pics inside

so i wont be able to use this with my turboedit/ecu control/willem burner setup? ..man that sucks.. the website says i can download some of the software for free, but it looks like i have to buy more stuff..guess ill sell the 2timer

or am i reading wrong?
staticchmbr is offline  
Old 02-22-2006, 02:00 PM
  #7  
0.5 BAR
 
Join Date: Jan 2006
Posts: 130
Default Re: moates/xenocron 2Timer/2-step...how to use? pics inside

PM xenocron... He'll probably be able to straighten you out.
mugenblacky16 is offline  
Old 02-23-2006, 11:16 AM
  #8  
0.5 BAR
 
Join Date: Apr 2005
Posts: 70
Default Re: moates/xenocron 2Timer/2-step...how to use? pics inside

burn one 32k file on the 512 with offset set to 0, then burn another file with offset set to 8000, you don't 'have' to stack them first.
scrotumLIP is offline  
Old 02-23-2006, 09:21 PM
  #9  
3.0 BAR
 
Join Date: Jul 2003
Posts: 6,449
Default Re: moates/xenocron 2Timer/2-step...how to use? pics inside

Make two BIN files with your Program of choice. (TurboEdit, Crome, Uberdata...etc...hell, Hondata probably)

Make sure you have a burner that can burn SST 512 chips (BURN1 and Willem both do).

Burn the 1st file, the one you are going to run on most times to the address on the chip from 08000 - 0ffff.

Burn the 2nd file to the addresses 00000 - 07fff

Take the chip and plug it into the 2TIMer in the correct direction. Plug the 2Timer into the ECU.

Take the wire from the 2Timer and connect it to one side of a switch. Mount the switch and connect the other side of the switch to a wire that goes to ground.

Switch OFF, program 1 is used, switch ON, program 2 is used.

If you want to switch on the fly, the checksum needs to be disabled in the ROM in both programs, they need to be similar and have the same features, etc added. The only differences should be in the maps or things like 2 step, rev limits and then it can be switched on the fly. If the two programs are drastically different, the car needs to be off when you flip the switch.
Chris Harris is offline  
Old 02-24-2006, 09:28 AM
  #10  
1.0 BAR
Thread Starter
 
Join Date: Mar 2004
Posts: 609
Default Re: moates/xenocron 2Timer/2-step...how to use? pics inside

awesome!!^^ thats what i needed to know. thanks man
staticchmbr is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
90dx
Turbo Parts For Sale
12
06-20-2009 04:44 AM
migizzel
Engine Management
5
10-29-2007 01:53 AM
RCHB
General Discussion
23
02-03-2004 11:54 PM
toalan
Forced Induction
3
08-03-2003 10:58 AM


Thread Tools
Search this Thread
Quick Reply: moates/xenocron 2Timer/2-step...how to use? pics inside


Contact Us - Sitemap - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.