moates burner question
 

i need some help here... im trying to upload a map to my chip (27SF512) which is on the supported list... and every time i try to verify it aginst the buffer it comes back negative and when i save what the chip has and read it its one setting all the way across in the fuel and timeing tables and the injector size is totaly fucked over

anyone know what i'm doing wrong? :l

Re: moates burner question
 

i check it right after burning and it says the chip is blank :l

Re: moates burner question
 

are you insterting the chip right onto the burner?

Re: moates burner question
 

im putting it in exactly as the picture on there website shows it... so unless thats wrong then yes im putting it in correctly as far as i know

Re: moates burner question
 

are you loading the file? on mine, i have to have whatever program that im burning closed. (close uberdata if im burning a rom from the uber directory).

Re: moates burner question
 

yup, uberdata is closed and i load the bin to the buffer and hit program chip... it says sucessful, then when i check to see if its blank it says chip is blank

Re: moates burner question
 

wierd. ---- those 27s chips.

Re: moates burner question
 

its all i have right now and its all thats stopping my car from running >:(

would any store that carrys parts like that (radio shack maybe?) carry the types of chips supported? if so i'd rather go and get some tomorrow then way another 3-4 days to have my car running :l

Re: moates burner question
 

well i ordered some new chips to make sure if its the chips or not...

untill then, anyone else have an idea? what does everyone have there com and other settings at? i went by the instructions on moates website

Re: moates burner question
 

BTW here is what my burner says while doing it


PromIO.dll Version: 1.00.0098.00
HW: Flash & Burn v5.10.F


Checking for blank device...
Chip is blank.
File Loaded: \Desktop\Uberdata1.70\8K limit.bin
File Size in bytes (Integer/Hex): 32768/0x8000
Programming Device from buffer...
-----------------------------------
PROM I/O succeeded.
Verifying device against buffer...
FAILURE: Verification Failed (not matched)
Checking for blank device...
Chip is blank.

Re: moates burner question
 

I don't know why this might make the chip register as blank, but are starting the burn at the correct offset address?

http://www.moates.net/documentation....entation_id=20

Homdas use a 32k file.

Re: moates burner question
 

i set it up according to the write up on there site, everything is set right as far as i know

Re: moates burner question
 

http://i64.photobucket.com/albums/h1...crzy/burn1.jpg

are your hex numbers like those?

Re: moates burner question
 

nope, these are mine

32k (32768) 27SF512 008000 -> 00FFFF

000000 -> 007FFF

Re: moates burner question
 

when i click on the 27SF.. chip option, the codes change to this.
CHIP ADDRESSING
000000 -> 00FFFF

BUFFER ADDRESSING
000000 -> 007FFF

try changing them, that could be it.

Re: moates burner question
 

mine wont even use those numbers... it changes them automaticly when i try to input them

Re: moates burner question
 

The ROM might be faulty.

Re: moates burner question
 

if you mean the burner then i dont think so... if your talking about the map then deffinitly not, i've tried over a dozen diffrent maps, downloaded ones and ones from my own computer

first time dealing with a chip burner so im a little illiterate :1

i guess i'll see if its the chips in a couple days

Re: moates burner question
 

Referring to the actual chip that you are trying to burn a map onto.

Re: moates burner question
 

damn people useing diffrent words...

i ordered two new chips from moates yesterday, so i'll see if it was just the chips in a couple days

Re: moates burner question
 

i know, i say chips, not eprom, lol.

anyways, try uninstalling and then re installing the program and drivers and ----.

Re: moates burner question
 

tried that as well, didnt change anything... talked to craig from moates (he actualy called me) and he said it's unusual for the chips to go bad like that but told me to give the ones i ordered a try and if they dont work he'd see what he can do for me

Re: moates burner question
 

moates.net FTW.. i bought already the BURN1 Flash-n-Burn USB-Based Chip Programmer , i hope it arrives soon! :-*

Re: moates burner question
 

Re: moates burner question
 

A problem I had sounds sorta similar to yours. It said it succeded, but everything was all fucked up, solid cel, etc. This was using the flash & burn program that came on the moates cd that somebody sent me w/the burner when I bought it. I went online and I found a different version of flash & burn, downloaded it, ran it, and it worked. Give it a try. Good luck.

Re: moates burner question
 

i did that as well and still a no go... i'll find out monday when i get my chips if its the burner or not for sure

Re: moates burner question
 

chips were just bad ^_^ goin out now to break the bitch in!