MAP Sensor
 

I tested my map sensor and im getting 5v
I know im only saposed to be getting .5v
this is a second map sensor i have tried. Im still having problems.. I double checked the vafc wireing everything is good.
If my MAP goes bad what readings will i get?

Re:MAP Sensor
 

when did you measure it? how did you measure it? what wire did you measure voltage from?

Re:MAP Sensor
 

i tested it at operating temp with the car running. i tried all 3 wires got close to the same with all wires.

Re:MAP Sensor
 

something is wrong.

should be

1 wire = 5v reference
1 wire = ground
1 wire = signal

Re:MAP Sensor
 

There is red,white,green
i ASSUME
red = 5v
white = signal
green = ground

AM i right?

Re:MAP Sensor
 

OBD-0

MAP +5v = C15 yel/red
MAP - = C14 grn/wht
MAP Sig = C11 = white

obd-1
MAP +5v = C19 = yel/grn
MAP - = C21 = grn/blu
MAP Sig = C17 = white

Re:MAP Sensor
 

you have 3 solid coloured wires? maybe some1 hacked the map wires.

Re:MAP Sensor
 

i have solid red,solid green solid white....
remember its a 1990 honda accord....
the motor is out of a 92 prelude..... so the red,green,white is stock accord set up..

Re:MAP Sensor
 

doesn't matter if it's solid or not.

white is your signal wire. make sure you use your ground reference with the green wire, otherwise it will just float.