HomemadeTurbo - DIY Turbo Forum
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Engine Management (https://www.homemadeturbo.com/engine-management-10/)
-   -   Low vs. High maps (Uberdata) (https://www.homemadeturbo.com/engine-management-10/low-vs-high-maps-uberdata-31129/)

MikeJ-2009 12-08-2004 12:28 AM
Re:Low vs. High maps (Uberdata)
 
This wasn't someone that offers services here, just someone that claims they know what they are doing.



I believe its all gravy...but when it comes to ECUs, you MUST know what you are doing.
That's why I'm here asking these questions. :P

So if I CAN tune a dx with the gsr bin with the vtec ---- turned off, than what's all the -----blasting for? ???

willahlborn 12-08-2004 12:49 AM
Re:Low vs. High maps (Uberdata)
 
Steve, got a wideband yet? If not i'm thinking of selling my Zeitronix... lemme know

MikeJ-2009 12-08-2004 12:55 AM
Re:Low vs. High maps (Uberdata)
 
I don't have a wideband, but I got people. ;) (can't right now)

Cray91 12-08-2004 01:00 AM
Re:Low vs. High maps (Uberdata)
 
Originally Posted by projekteg
Originally Posted by Stealthmode
I talked to someone who makes "basemaps" for people and he said that he's not sure, but he only uses the low maps and that's all he needs.
i hope this isn't our one and only 'cray91', i know you guys are buddies which is what leads me to believe it's him, if so, i hope your not chipping peoples ecu's and don't even know the diff. between high and lo maps cray :-\
I am never in this forum, so I just saw this.

Kevin you doubtn' my mad rare JDM tunning techniques?? ;)
you called me the "one and only", I never knew you cared Kev.


Also, I gotta get a new laptop so steve can owe me for tunning his ride when he turbo's it. I already chipped his ECU the other day. Nice to do a PO6, and not have to convert it to VTEC.

beerbongskickass 12-08-2004 03:41 AM
Re:Low vs. High maps (Uberdata)
 
Originally Posted by beerbongskickass
Originally Posted by Stealthmode
The basemap maker also told me to start off with the stock gsr bin because I couldn't get the po6 stock to open.
The basemap maker told me only "the one" could open the door made of light.


So nobody liked my joke about the matrix and the key maker?

I thought it was funny... :(

Cray91 12-08-2004 03:44 AM
Re:Low vs. High maps (Uberdata)
 
It was kinda funny.

biggmike 12-14-2004 11:11 AM
Re:Low vs. High maps (Uberdata)
 
Originally Posted by Stealthmode
I talked to someone who makes "basemaps" for people and he said that he's not sure, but he only uses the low maps and that's all he needs. ???
very scary stuff there.

MikeJ-2009 12-14-2004 04:48 PM
Re:Low vs. High maps (Uberdata)
 
Originally Posted by biggmike
Originally Posted by Stealthmode
I talked to someone who makes "basemaps" for people and he said that he's not sure, but he only uses the low maps and that's all he needs. ???
very scary stuff there.
Well, reading the whole post you'd see I'm running a straight dx, which doesn't have VTaK, so if the high maps are for the VTIZZACK, then it shouldn't be all that scary. :P

biggmike 12-14-2004 05:25 PM
Re:Low vs. High maps (Uberdata)
 
i figured that high and low was common sense. i would be scare cause that part is easy to figure out just wondering what else homeboy dont know.

Originally Posted by Will
Steve, got a wideband yet? If not i'm thinking of selling my Zeitronix... lemme know
how much?


All times are GMT -5. The time now is 06:20 PM.
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands