Go Back  HomemadeTurbo - DIY Turbo Forum > Homemadeturbo > Engine Management
lets start a post on chipping components(sticky please) >

lets start a post on chipping components(sticky please)

Engine Management eCtune , Crome , AFC , FMU , Zdyne , Hondata , EMS , TE , Uberdata Anything to control your fuel, spark needs!

lets start a post on chipping components(sticky please)

Old 03-10-2004, 07:33 PM
  #1  
3.0 BAR
Thread Starter
 
Join Date: Jan 2004
Posts: 2,090
Default lets start a post on chipping components(sticky please)

just thinking instead of searching everywhere for parts we should gather all the suppliers, cost, and minumum order stuff so eveyone know where to get the hook up. just an idea
biggmike is offline  
Old 03-10-2004, 07:50 PM
  #2  
3.0 BAR
 
Join Date: Apr 2003
Posts: 2,260
Default Re:lets start a post on chipping components(sticky please)

Lets not.

Prices change, availability changes, the parts list is not that long, nor complex. There is no point.

This is not an electronics board. If you're going to start getting heavy into ECU modification, go to PGMFI. Basic help on chipping, sure. However, in depth electronics are outside of the scope of this forum.
TurboEF9 is offline  
Old 03-10-2004, 07:57 PM
  #3  
3.0 BAR
Thread Starter
 
Join Date: Jan 2004
Posts: 2,090
Default Re:lets start a post on chipping components(sticky please)

just trying to help the cause sorry for trying others i can do my own search but other people might want to find the cheapest place to get one kit or two to do theirs and a freinds?
biggmike is offline  
Old 03-10-2004, 08:09 PM
  #4  
3.0 BAR
 
Join Date: Apr 2003
Posts: 2,260
Default Re:lets start a post on chipping components(sticky please)

Maybe that could be your job.

Put together chipping kits. Steve has oil line kits.. you can throw together a ECU kits. Sounds even easier than having people trying to search for things, order them, and what have you.

Personally, if I were a regular user, I wouldn't argue over spending $5-7 for someone to throw the kit together for me and ship it.
TurboEF9 is offline  
Old 03-10-2004, 08:23 PM
  #5  
3.0 BAR
Thread Starter
 
Join Date: Jan 2004
Posts: 2,090
Default Re:lets start a post on chipping components(sticky please)

lol $5-$7 the 29c256 is atleast $5 and the zif socket is $5 so thats $10 aleardy and those other pieces are a few dollars so more like $13-$15 unless u know something i dont?
or u saying $5-$7 over the cost of the components maybe i read u wrong?
http://www.mouser.com
possibly good place to buy ---- from
biggmike is offline  
Old 03-11-2004, 03:09 AM
  #6  
0.0 BAR
 
Join Date: Feb 2003
Posts: 0
Default Re:lets start a post on chipping components(sticky please)

Originally Posted by biggmike
...
or u saying $5-$7 over the cost of the components maybe i read u wrong...
http://www.mouser.com
possibly good place to buy ---- from
i think thats the idea. the cost of items plus some compensation for your time
45psi is offline  
Old 03-11-2004, 03:52 AM
  #7  
3.0 BAR
 
Join Date: Apr 2003
Posts: 2,260
Default Re:lets start a post on chipping components(sticky please)

As the post said, "I wouldn't argue over spending $5-7 for someone to throw the kit together for me and ship it". The $5-7 was to compensate. I didn't think I needed to state the obvious of paying for the parts.
TurboEF9 is offline  
Old 03-11-2004, 07:03 AM
  #8  
3.0 BAR
Thread Starter
 
Join Date: Jan 2004
Posts: 2,090
Default Re:lets start a post on chipping components(sticky please)

sorry me slow/retard
biggmike is offline  
Old 03-11-2004, 09:56 AM
  #9  
1.0 BAR
 
Join Date: Apr 2003
Posts: 288
Default Re:lets start a post on chipping components(sticky please)

www.future-active.com:
ZIFs for $4.75, q.15
SST27SF256 (flash chip, replacement for 29C) $1.50 or less in single quantity
2 cents for resistor
5 cents for 2 capacitors
I see about $6.50 worth of parts, and $3.80 for priority mail shipping w/ DC.
blundar is offline  
Old 03-11-2004, 09:57 AM
  #10  
1.0 BAR
 
Join Date: Apr 2003
Posts: 288
Default Re:lets start a post on chipping components(sticky please)

oh yeah, ALL THIS INFO WAS IN THE PGMFI WIKI!!! You might want to broaden your reading material a little... If you're going to do electronics, consult with others who are of a similar mindset.
blundar is offline  

Thread Tools
Search this Thread
Quick Reply: lets start a post on chipping components(sticky please)


Contact Us - Sitemap - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.