leed Base map for h22??
#5
Re:leed Base map for h22??
Well dustin burned a chip for me last night and I am still getting the 4grand rev limit, and 2 grand idle along with a solid cell. I didnt know uberdata was so... premature so you could say? I thought all of this was pretty solid?! really wish I wouldnt have sold that stock p13 now
Any help would be appricated by anyone.
Jeff
Any help would be appricated by anyone.
Jeff
#6
Re:leed Base map for h22??
Here is the Original .bin that it started on.
http://www.draglab.com/H22 base2fuel1u165r3.bin
You say 4k limit? Thats the FTL. High 2k idle when cold in normal (sorta) on some Uber bins. Let it warm up yo'
Heres the Original w/ FTL disabled, and your suggested fueling changes.
http://www.draglab.com/Original NoFT...wot U163r3.bin
Dustin, if you burn a new one for Jeff and Progstudio does that 'reprogramming xxx sector' ten times bullshit, give him a fresh 29c, or atleast verify rom-to-buffer to be sure.
http://www.draglab.com/H22 base2fuel1u165r3.bin
You say 4k limit? Thats the FTL. High 2k idle when cold in normal (sorta) on some Uber bins. Let it warm up yo'
Heres the Original w/ FTL disabled, and your suggested fueling changes.
http://www.draglab.com/Original NoFT...wot U163r3.bin
Dustin, if you burn a new one for Jeff and Progstudio does that 'reprogramming xxx sector' ten times bullshit, give him a fresh 29c, or atleast verify rom-to-buffer to be sure.
#7
Re:leed Base map for h22??
You say 4k limit? Thats the FTL. High 2k idle when cold in normal (sorta) on some Uber bins. Let it warm up yo'
Heres the Original w/ FTL disabled, and your suggested fueling changes
Heres the Original w/ FTL disabled, and your suggested fueling changes
I dont know enough about this stuff to really know whats going on? is it a hardware problem or a software problem? both? The pins and the solder job you did look fine. Is it possible 2 bad burns in a row?
#8
Re:leed Base map for h22??
Sorry your having problems dude, long distance trouble shooting blows.
When you go key on, does the CEL ever go out? Then come back on?
Get Dustin to burn the Original .bin. If that works then burn the second one I posted.
When you go key on, does the CEL ever go out? Then come back on?
Get Dustin to burn the Original .bin. If that works then burn the second one I posted.
#9
Re:leed Base map for h22??
it burned fine only did the reprograming sector xx once or twice (like it always does for me).
i will go find my other chips and reburn both those, Jeff i will be out and round tomarrow running some arrines (day off) so give me a call...
i will go find my other chips and reburn both those, Jeff i will be out and round tomarrow running some arrines (day off) so give me a call...