Leaky 450
02-15-2004, 02:40 PM
#1
3.0 BAR
Thread Starter
Join Date: Mar 2003
Posts: 5,282
Leaky 450
Well guy's, I'm going to be starting my turbo install so I decided to get my 450cc injector install out of the way. All went well and was relatively easy, but when I went to check for any fuel leaks when I pressurize the fuel rail, 1 injector is leaking. It seems to be leaking where the blue plastic meets the metal part of the injector. I can see bubbles coming out of there. has anyone else had or seen this before? Guess I may be in the need for a new injector 
02-15-2004, 03:05 PM
#2
3.0 BAR
Thread Starter
Join Date: Mar 2003
Posts: 5,282
Re:Leaky 450
Ok, problem solved 
. I overlooked something really simple. I decided to pull out the leaking injector and replace the o-ring that goes into the fuel rail. It stopped the leak. Now to program an Uberdata chip to run these baby's 
. I overlooked something really simple. I decided to pull out the leaking injector and replace the o-ring that goes into the fuel rail. It stopped the leak. Now to program an Uberdata chip to run these baby's
Thread
Thread Starter
Forum
Replies
Last Post
