HomemadeTurbo - DIY Turbo Forum - LC-1 to replace narrowband?

Page 2 of 2

Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Engine Management (https://www.homemadeturbo.com/engine-management-10/)

- - LC-1 to replace narrowband? (https://www.homemadeturbo.com/engine-management-10/lc-1-replace-narrowband-95875/)

MAJORAHOLE

10-03-2008 05:26 PM

Re: LC-1 to replace narrowband?

i tried it at their oem spec, and i still got an 02 cel.
hmmm, i guess ill check pgmfi

stenseltizm

10-03-2008 05:30 PM

Re: LC-1 to replace narrowband?

are you throwing an error for incorrect voltage, or is the ecu seeing a fuckup in the O2 heater circuit? I don't know if honda's have a code for that but my dd just threw that one.

MAJORAHOLE

10-03-2008 06:13 PM

Re: LC-1 to replace narrowband?

iirc it was the cell for the heater deal, so that has nothing to do with my prob?
i didnt think there was a different code for the voltage input

JonDouglas

10-05-2008 04:51 AM

Re: LC-1 to replace narrowband?

Quote:

Originally Posted by MAJORAHOLE

iirc it was the cell for the heater deal, so that has nothing to do with my prob?
i didnt think there was a different code for the voltage input

You have to disable the O2 heater code n the ROM in order to use a WB as your NB input in the ECU. Either that or run a ballast resister or wire in the stock NB O2 and only hook up the heater circuit.

Personally I just used Innovates stock NB voltage curve and disabled the O2 heater code in the ROM when I was running my LC1 full time.

All times are GMT -5. The time now is 03:56 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page