HomemadeTurbo - DIY Turbo Forum

Engine Management eCtune , Crome , AFC , FMU , Zdyne , Hondata , EMS , TE , Uberdata Anything to control your fuel, spark needs!

LC-1 to replace narrowband?

   
Old Oct 3, 2008 | 10:45 AM
Share
  #1  
MAJORAHOLE's Avatar
MAJORAHOLE
Thread Starter
3.0 BAR
 
Joined: Apr 2005
Posts: 1,521
Default LC-1 to replace narrowband?
what values to i need to reprogram it to? i'm still getting a CEL. i connected it to the D14(i think, white wire). i couldnt find ---- on google. thanks for any help
Reply
Old Oct 3, 2008 | 11:28 AM
Share
  #2  
V8 Dave's Avatar
V8 Dave
0.5 BAR
 
Joined: Oct 2005
Posts: 94
Default Re: LC-1 to replace narrowband?
IIRC it's one of the analogue outputs that need to be programmed as 0-1v narrowband.
Reply
Old Oct 3, 2008 | 11:35 AM
Share
  #3  
MAJORAHOLE's Avatar
MAJORAHOLE
Thread Starter
3.0 BAR
 
Joined: Apr 2005
Posts: 1,521
Default Re: LC-1 to replace narrowband?
ok, thats what i needed to know. i couldn't find the voltage values anywhere.
is that 1v at 15 or so afr?
Reply
Old Oct 3, 2008 | 12:19 PM
Share
  #4  
V8 Dave's Avatar
V8 Dave
0.5 BAR
 
Joined: Oct 2005
Posts: 94
Default Re: LC-1 to replace narrowband?
yeah, that's what I have written down on a scrap of paper from when I set up a buddies LC1.
Reply
Old Oct 3, 2008 | 12:29 PM
Share
  #5  
Smith-02's Avatar
Smith-02
0.0 BAR
 
Joined: Apr 2006
Posts: 0
Default Re: LC-1 to replace narrowband?
like .18 at air, 1v at fuel. afr is in the middle


Reply
Old Oct 3, 2008 | 12:42 PM
Share
  #6  
MAJORAHOLE's Avatar
MAJORAHOLE
Thread Starter
3.0 BAR
 
Joined: Apr 2005
Posts: 1,521
Default Re: LC-1 to replace narrowband?
Originally Posted by c0mpl3x
like .18 at air, 1v at fuel. afr is in the middle
Reply
Old Oct 3, 2008 | 02:04 PM
Share
  #7  
Smith-02's Avatar
Smith-02
0.0 BAR
 
Joined: Apr 2006
Posts: 0
Default Re: LC-1 to replace narrowband?
Originally Posted by MAJORAHOLE
narrowband is 0-1v, atmoswhere is .18v or so, and saturated in fuel its like .9v

how does setting stoich, which is like .45v on a narrow, at 1v on a 0-1v scale, work?
Reply
Old Oct 3, 2008 | 03:02 PM
Share
  #8  
MAJORAHOLE's Avatar
MAJORAHOLE
Thread Starter
3.0 BAR
 
Joined: Apr 2005
Posts: 1,521
Default Re: LC-1 to replace narrowband?
im just tryin to figure out what i should set it at
so 0 on the lean side and 1v on the rich side?
Reply
Old Oct 3, 2008 | 04:16 PM
Share
  #9  
Smith-02's Avatar
Smith-02
0.0 BAR
 
Joined: Apr 2006
Posts: 0
Default Re: LC-1 to replace narrowband?
Originally Posted by MAJORAHOLE
im just tryin to figure out what i should set it at
so 0 on the lean side and 1v on the rich side?
look up the proper voltage, im just going from memory, i could be wrong. ask someone who tunes or plays with widebands that have narrow output
Reply
Old Oct 3, 2008 | 04:31 PM
Share
  #10  
stenseltizm's Avatar
stenseltizm
3.0 BAR
 
Joined: Sep 2004
Posts: 1,587
Default Re: LC-1 to replace narrowband?
lc-1 manual claims their Analog Out 1 is already programmed from the factory to narrow band specs. It shows 1.100Volt at Lambda: 0.958 and 0.103 Volt at Lambda: 1.022
Reply

Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -5. The time now is 04:10 PM.