HomemadeTurbo - DIY Turbo Forum - Installed the LC-1 in my Teg yesterday.

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Engine Management (https://www.homemadeturbo.com/engine-management-10/)

- - Installed the LC-1 in my Teg yesterday. (https://www.homemadeturbo.com/engine-management-10/installed-lc-1-my-teg-yesterday-62224/)

Re: Installed the LC-1 in my Teg yesterday.

apex-i, nice job! :)

Re: Installed the LC-1 in my Teg yesterday.

Quote:

Originally Posted by snm95ls

Hopefully I don't have any problems. My analog and system grounds are tapped into the ECUs pin A26, My heater ground is tapped into the ECUs pin A23. I ran this setup in my other teg for about 3 months.

Keeping my fingers crossed.

I used to wire my wideband like this and the wideband itself displays the right stuff, but any time I datalogged in an ECU program(crome or uberdata) the values at WOT would be insanely off. Cruising would be fine, but WOT was horribly off(1-1.5AFR off). I'd just suggest monitoring that. You may need to have the wiring go straight to the battery.

Otherwise I'm impressed with the accuracy of the turbo timer linking up with log works. Looks great.

Re: Installed the LC-1 in my Teg yesterday.

It doesn't seem to be off at WOT. The only way I have to verify this my ass and my ears. I would think that if it was reding that far off that the engine would be sputtering and pinging at WOT since my A/F on the high end is around 13.0-13.3. That's kinda lean but this is also NA. :-X

I would like to get to a dyno soon to check its accuracy and see what I'm laying down with the ITR cams. :y