Re:I need standalone or piggyback ....help
 

How about The steed speed additional injector controller.

A Boost Controlled Auxiliary Fuel Injector Controller with Oxygen Sensor reference.

The BFE 100 monitors the intake manifold boost using an internal 2 Bar (28 PSI Max.) MAP Sensor and the O2 sensor to add a progressive amount of fuel as boost increase. The O2 sensor input is used to cover momentarily lean spots in the fuel curve. The amount of fuel added and the boost starting point for adding fuel is adjustable.

The BFE 100 is easy to setup - no laptop required, using front mounted knobs.

The BFE 100 will driver up to 8 Hi Impedance injectors.

Installation takes on average 2 hours not including secondary injector and fuel rail.

BFE 100 Connections




The Unit is 2.5 long x 2” wide x 1.5” high.


Introductory Price - US$200.00





Coming soon the steed speed 200 a universal boost referenced timing retard box. Works with most stock electronic distributors and stock or aftermarket ignition amplifiers.

Re:I need standalone or piggyback ....help
 

is that like this:

https://www.homemadeturbo.com/turbo_...gement_1_P.jpg
https://www.homemadeturbo.com/turbo_...gement_2_P.jpg

?

Re:I need standalone or piggyback ....help
 

I plan on running Cybernation Black Magic...

Re:I need standalone or piggyback ....help
 

It is? I can't afford a laptop, usually just load the computer with an AC/DC inverter into the passenger seat.

I feel a lot better now that I had a ghetto 15" monitor kicked me, because I was a bit scared about hurting the 19" I paid $ for.

Re:I need standalone or piggyback ....help
 

You can try the EFI PMS systems, it is a piggyback with its own hand controller, but if you do decide to buy the Intercaq software it will give you the ability to datalog and make the system a full standalone unit. The only problem with this is it doesnt have any applications for Non OBD cars.... :-[

If you want more info go here www.efisystems.com alot of info on the product. And if you DO decide you want this unit PM me I have one for sale ;D

Re:I need standalone or piggyback ....help
 

I'm running the SDS EIC on my turbo ZC. It's very easy to control and install.
The complete 2 injector kit is $500 and can handle up to 160hp.
http://www.sdsefi.com/eic.html

Re:I need standalone or piggyback ....help
 

Well, Blake got kicked off this board for being a complete prick - because he is - but for $200 plus a chip burner the OBD1 guys are pretty hooked up:

http://www.honda-tech.com/zerothread?id=468553

His service is above par. It just goes to prove that complete assholes can be successful businessmen, too.