Engine Management eCtune , Crome , AFC , FMU , Zdyne , Hondata , EMS , TE , Uberdata Anything to control your fuel, spark needs!

how much timing on a built z6

Thread Tools
 
Search this Thread
 
Old 02-24-2006, 07:05 PM
  #1  
1.5 BAR
Thread Starter
 
sohcpwr's Avatar
 
Join Date: Sep 2004
Posts: 1,460
Default how much timing on a built z6

most of you know my setup, my buddy who helped me with the initial tune on my unbuilt motor was used to his y8, and runs alot less timing. I talked to him the other day and he said he was looking over some peoples crome maps and they were running way more timing than i was. I didnt put the 2.5 bar map in yet, but the 11.03 column is set to 19.65 or something. i also just saw someone elses map that was running almost 30 degrees to 8psi. i think mine is at like 22? anyone have a screenshot of a built d timing map?
sohcpwr is offline  
Old 02-25-2006, 01:51 PM
  #2  
0.0 BAR
 
Bone1's Avatar
 
Join Date: Jan 2005
Posts: 0
Default Re: how much timing on a built z6

30 degrees, are they nuts?
Bone1 is offline  
Old 02-25-2006, 04:16 PM
  #3  
0.0 BAR
 
Tom-Guy's Avatar
 
Join Date: Feb 2003
Posts: 0
Default Re: how much timing on a built z6

Originally Posted by Mista Bone
30 degrees, are they nuts?
Totally loopy.
Tom-Guy is offline  
Old 02-25-2006, 05:51 PM
  #4  
1.5 BAR
 
boosted_b16's Avatar
 
Join Date: Nov 2004
Posts: 820
Default Re: how much timing on a built z6

30 degrees is recockulous, who ever made that map is retarded, whats your c/r? how much boost? like 9:1 c/r and under 13-14 psi i wouldnt be afaid to run like 24 degrees of timing on a built motor, as long as it has the fuel map tuned to BELOW 12:1 afr's, like 11.8:1 or so, you could get a few extra ponies with 1.5-2 more deg. of timing, but dont push it, its a shame to blow a built motor, i have done it!
boosted_b16 is offline  
Old 02-25-2006, 08:41 PM
  #5  
1.0 BAR
 
93hatchdx's Avatar
 
Join Date: Jul 2004
Posts: 226
Default Re: how much timing on a built z6

wow! my timing i belive is around 14.. My buddy tuned for free and doesnt waana be responsible for blowing my motor until i get a more knowledgeable tuner on the dyno. My setup is z6 block y 8 head. Im yielding roughly 8:1 C/R!! I just go tmy 2.5 bar and hittin the dyno soon. Is there an appx. hp per degree of timing?
93hatchdx is offline  
Old 02-26-2006, 12:09 AM
  #6  
0.0 BAR
 
Guy-Fast's Avatar
 
Join Date: Dec 2002
Posts: 0
Default Re: how much timing on a built z6

30 huh?


Thats a little much there


Be overly conservative if you dont know what your doin or have one of the guys like JD do a basemap for ya and buy him a 40.
Guy-Fast is offline  
Old 02-26-2006, 01:14 PM
  #7  
0.0 BAR
 
Bone1's Avatar
 
Join Date: Jan 2005
Posts: 0
Default Re: how much timing on a built z6

My D15B7 NA map only hits 37.5-40 degrees of timing at 10-11" of vacuum.........

and it's just a stock NA motor getting 40+ mpg with a close ratio tranny
Bone1 is offline  
Old 02-26-2006, 03:35 PM
  #8  
3.0 BAR
 
88dx's Avatar
 
Join Date: Nov 2003
Posts: 5,838
Default Re: how much timing on a built z6

30 degrees sounds fine on race gas
88dx is offline  
Old 02-26-2006, 05:42 PM
  #9  
3.0 BAR
 
Dr.Boost's Avatar
 
Join Date: Mar 2003
Posts: 21,479
Default Re: how much timing on a built z6

Are you sure that 30* wasn't BEFORE boost retard was set? I got a map from an unmentioned "tuner" on here and it had the timing set at 29* at the top of the map.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Dr.Boost is offline  
Old 02-26-2006, 06:19 PM
  #10  
1.0 BAR
 
Foowee's Avatar
 
Join Date: Feb 2004
Posts: 311
Default Re: how much timing on a built z6

Originally Posted by Dr.Boost
Are you sure that 30* wasn't BEFORE boost retard was set? I got a map from an unmentioned "tuner" on here and it had the timing set at 29* at the top of the map.
Doc, timing should be retarded before torque peak. After you reach this point where maximum cylinder filling occurs, you can then advance the timing to gain ponies.
Foowee is offline  


Quick Reply: how much timing on a built z6



All times are GMT -5. The time now is 12:07 PM.