Horrid idle + no datalog on te2 + pfmi 1 stable rom
I'm running turboedit 2t9 plus the pgmfi 1.0 stable rom. I have the fuel/spark maps running great, but the iddle is terrible. Sometimes it'll idle fine; but most of the time it'll fluctuate maybe 200rpms very fast, and other times it'll fluctuate 1000+ rmps. I have 2 iacv valves (one that is totally out, and one thats new from a junkyard).
With the stock PM6 bin loaded it'll idle just fine with the 2nd valve, a bit low after it warms up but stable at least. Anyone know how to fix this? Also datalogging won't work. But i remember reading a thread on pgmfi.org that its still in the works but could someone clear that up for me? |
Re:Horrid idle + no datalog on te2 + pfmi 1 stable rom
datalogging isnt up yet (plus you need more ---- than a PM6 to DL). the idle is fucked, i have 3 cars using TE...ALL DO IT
|
Re:Horrid idle + no datalog on te2 + pfmi 1 stable rom
I've hard a few idle probs in n/a. Figured out that the idle was to high on the thottlebody so the Idle control valve trys to comensate causing it to up and down. I had it as bad as 500-1500 rpm up and downs. Finally found that the adjustment screw was not tightening properly and would vibrate out. I just set the idle and the glue the screw in place with gasket sealant. I just pull the sealant out when I need to adjust and the reglue it.
|
Re:Horrid idle + no datalog on te2 + pfmi 1 stable rom
my adjustment screw is ALL the way out and will idle barely above 500rpm if the iacv is unplugged. hmmmm
oh and i do have a ttl-to-rs232 board, turbohf, its max232 based and tested and working with ecu control + their na bin |
Re:Horrid idle + no datalog on te2 + pfmi 1 stable rom
TurboEdit has nothing to do with the idle issues...it is an issue with the ROM.
Understand that TurboEdit is a tool...the ROM is the key. TurboEdit allows the lay user to alter fuel and timing and select built-in features of the ROM easily...without manually going in and hex editing yourself. |
Re:Horrid idle + no datalog on te2 + pfmi 1 stable rom
that is true.. but has this idle problem been figured out?
|
Re:Horrid idle + no datalog on te2 + pfmi 1 stable rom
Originally Posted by xenocron
TurboEdit has nothing to do with the idle issues...it is an issue with the ROM.
Understand that TurboEdit is a tool...the ROM is the key. TurboEdit allows the lay user to alter fuel and timing and select built-in features of the ROM easily...without manually going in and hex editing yourself. on a side note; when will datalogging be working? |
Re:Horrid idle + no datalog on te2 + pfmi 1 stable rom
Originally Posted by ComputerJLT
it's a turboedit rom is it not?
|
Re:Horrid idle + no datalog on te2 + pfmi 1 stable rom
ive also experienced slight idle surge. between 700-1000
|
Re:Horrid idle + no datalog on te2 + pfmi 1 stable rom
ok, so my idle sucks ass too....but i have already complained about that ::)
but here is the thing, i setup a turbokit on my buddies hatch running turboedit.... NO IDLE PROBLEMS!!! its a solid idle at 1000...of course we cant get the car to come into boost but im pretty sure its cuz his timing is fucked up (keep forgetting the timing light). btw his car is running the stablerom.... |
Re:Horrid idle + no datalog on te2 + pfmi 1 stable rom
Originally Posted by TurboEF9
Originally Posted by ComputerJLT
it's a turboedit rom is it not?
when will i get to use datalogging kind sir? |
Re:Horrid idle + no datalog on te2 + pfmi 1 stable rom
Hehehehe...
I dunno. When I get off my lazy ass and change the routine. I've been busy in the real world recently. Working out a deal on a few new motors, and then TE will be back in full force. Datalogging is top priority right now on the TE front. I believe on the ROM front they're working on going back and fixing issues that have been popping up in the current Stable. Then development will move forward with RTP, and WBO2 support.. |
Re:Horrid idle + no datalog on te2 + pfmi 1 stable rom
Originally Posted by TurboEF9
Hehehehe...
I dunno. When I get off my lazy ass and change the routine. I've been busy in the real world recently. Working out a deal on a few new motors, and then TE will be back in full force. Datalogging is top priority right now on the TE front. I believe on the ROM front they're working on going back and fixing issues that have been popping up in the current Stable. Then development will move forward with RTP, and WBO2 support.. btw; will there ever be a way that one could scale the maps to run more than 10psi of boost (with a 2/2.5/3 bar map sensor). Kinda like in uberdata? That'd be killer! |
Re:Horrid idle + no datalog on te2 + pfmi 1 stable rom
You already can.. it's just not accessible to "the masses".
I haven't figured out a way to "safely" let users edit the MAP scalars. If you look under the options, the MAP sensor option should be there.. it's just does "do" anything yet. Once I figure out a way to "fool proof" the MAP scalar edit, then everyone can use it. However, if you need a 3bar ROM, I believe I have one that Dave made laying around.. needs tuning, but should work. |
All times are GMT -5. The time now is 12:23 PM. |
© 2024 MH Sub I, LLC dba Internet Brands