Re: Hooking up LC-1 WB. Cleanest way?
 

Yeah your probably right about the cig lighter. How was your ground though it could have been weak.
And another thing,He could be using the cig lighter for a charger or something.

Just run a line from the battery.

Re: Hooking up LC-1 WB. Cleanest way?
 

Chassis Ground and an accesory wire from the radio or better yet, straight from the fuse box.

Re: Hooking up LC-1 WB. Cleanest way?
 

Ya, I know I can do that, I just like modular stuff that you can take out and use somewhere else easily. I even wanna vband my downpipe... cuz i'm just wierd like that.

I'm not gonna tie it to the cig lighter b/c that line is noisy as hell. I don't wanna screw my LC-1 with the noise or possibly induce more noise on that line.
I've gotta look at the diagram again but I think the fuse box has an accessory line that I can connect to(5th gen did), I'll just use an inline fuse with that.

Re: Hooking up LC-1 WB. Cleanest way?
 

Just hhok it right up to the ECU, this is how mine is done and everyone else i know.

Re: Hooking up LC-1 WB. Cleanest way?
 

What's a Bully built LS?

Re: Hooking up LC-1 WB. Cleanest way?
 

It's a fully built LS that bullys other motors. ;)

Re: Hooking up LC-1 WB. Cleanest way?
 

No feasable when you want it transferable between vehicles.

Re: Hooking up LC-1 WB. Cleanest way?
 

I think he meant the harness. At least I hope he did...

Re: Hooking up LC-1 WB. Cleanest way?
 

i hooked mine up to the ecu's power and ground. via an extension harness, which is obd 1 on both sides....if you you a regular jumper harness then you can not use it in diffrent obd level cars, only thoes that your jumper harness matches.

Re: Hooking up LC-1 WB. Cleanest way?
 

I am thinking, if we uses bullet connectors?? tap a piece of the wire to the ECU harness so that way the LC-1 can be removeable.... Although I still have to do more thinking on this matter... think it is feasible?