High Boost with obd0

Reply Subscribe

Thread Tools

Search this Thread

Mar 16, 2004 | 08:58 PM

wankerman28

Thread Starter

0.0 BAR

Joined: Feb 2003

Posts: 25

High Boost with obd0

How much boost can be run on the obd0 system? Is 15 lbs to much? Will I need ti upgrade to the obd1 setup? Thanks in advance

Mar 16, 2004 | 09:05 PM

RENR

3.0 BAR

Joined: Jan 2003

Posts: 4,399

Re:High Boost with obd0

400000000 psi no problem.... :P

Mar 16, 2004 | 09:18 PM

willahlborn

1.5 BAR

Joined: Mar 2003

Posts: 1,190

Re:High Boost with obd0

obd0 won't limit you, the strength of your engine will. there shouldn't be any difference in the amount of boost an obd0 vs obd1 system can handle.

Mar 16, 2004 | 09:48 PM

wankerman28

Thread Starter

0.0 BAR

Joined: Feb 2003

Posts: 25

Re:High Boost with obd0

That's good to know. I was gonna swap everything for obd1 but if I don't have to, I won't. I'll use the cash for stronger internals. Should I get my ecu chipped for more boost or a different ecu altogether? Are there any companies out there that still reprogram the obd0 ecu? Thanks again guys.

Mar 16, 2004 | 10:17 PM

beerbongskickass

0.0 BAR

Joined: Dec 2002

Posts: 0

Re:High Boost with obd0

Read the FAQ...

To answer your question www.turboedit.org

Mar 17, 2004 | 10:15 AM

greddycrx

Guest

Posts: n/a

Re:High Boost with obd0

i dont think its just if the motor can handle it. you most likely have to get a 2 or 3 bar map sensor as well, plus a built motor and bad *** fuel managment