HomemadeTurbo - DIY Turbo Forum - High Boost with obd0

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Engine Management (https://www.homemadeturbo.com/engine-management-10/)

- - High Boost with obd0 (https://www.homemadeturbo.com/engine-management-10/high-boost-obd0-17413/)

wankerman28

03-16-2004 08:58 PM

High Boost with obd0

How much boost can be run on the obd0 system? Is 15 lbs to much? Will I need ti upgrade to the obd1 setup? Thanks in advance

RENR	03-16-2004 09:05 PM

Re:High Boost with obd0

400000000 psi no problem.... :P

willahlborn

03-16-2004 09:18 PM

Re:High Boost with obd0

obd0 won't limit you, the strength of your engine will. there shouldn't be any difference in the amount of boost an obd0 vs obd1 system can handle.

wankerman28

03-16-2004 09:48 PM

Re:High Boost with obd0

That's good to know. I was gonna swap everything for obd1 but if I don't have to, I won't. I'll use the cash for stronger internals. Should I get my ecu chipped for more boost or a different ecu altogether? Are there any companies out there that still reprogram the obd0 ecu? Thanks again guys.

beerbongskickass

03-16-2004 10:17 PM

Re:High Boost with obd0

Read the FAQ...

To answer your question www.turboedit.org

greddycrx

03-17-2004 10:15 AM

Re:High Boost with obd0

i dont think its just if the motor can handle it. you most likely have to get a 2 or 3 bar map sensor as well, plus a built motor and bad ass fuel managment

All times are GMT -5. The time now is 08:44 AM.