HELP PS9 1 wire vtec
#14
Re:HELP PS9 1 wire vtec
Originally Posted by stolle
i hope i did help a lot of people cause this was agrevating trying figure this out thanks to Tinker_Tim over at pgmfi.org for telling me about the pull-down resistor this stuff is F'n sweet...
xenocron i sent you my bin file...
xenocron i sent you my bin file...
So basically you just took NG48 code, activated VTEC at "X" rpms in TurboEdit, added the resistor to bring the voltage down and viola! VTEC
Nice man and great prices...
Now you have to get a Turbo on that thing...I was surprised that you didnt have any boost maps in your BIN but then I remember that not everyone working with TurboEdit is boosting.
Thanks for posting this stuff here...many people will benefit.
I will add this to the FAQ after I get back from my Turkey Day travels!
Test some more and let us know how it goes.
You do have this hooked up to the VTEC solenoid now? And are activating properly?
#15
Re:HELP PS9 1 wire vtec
it will have a turbo i have a rhb5 and intercooler im waiting on some injectors and then i will start my turbo project but for now im learing as much as i can about TE and tuning so i dont blow my car up..
ps. read this thread this guy (tinker_tim) helped me alot, with the floating voltage thing, i have to give credit http://forum.pgmfi.org/viewtopic.php?p=28588#28588
ps. read this thread this guy (tinker_tim) helped me alot, with the floating voltage thing, i have to give credit http://forum.pgmfi.org/viewtopic.php?p=28588#28588
#17
Re:HELP PS9 1 wire vtec
Originally Posted by xenocron
Ah i see...
So in retorspect...if you hook A8 directly to the VTEC solenoid, you dont need any resistors.
If you are hooking up this output for another use, or for debugging, you will need the resistor.
So in retorspect...if you hook A8 directly to the VTEC solenoid, you dont need any resistors.
If you are hooking up this output for another use, or for debugging, you will need the resistor.
and also i have question for you xenocron that bin file i sent you when i open it in TE it wont let me go above 10.85 in the fuel table is this intentional or did i do something wrong help me out im breakin out the wideband today..
#18
Re:HELP PS9 1 wire vtec
Originally Posted by stolle
Originally Posted by xenocron
Ah i see...
So in retorspect...if you hook A8 directly to the VTEC solenoid, you dont need any resistors.
If you are hooking up this output for another use, or for debugging, you will need the resistor.
So in retorspect...if you hook A8 directly to the VTEC solenoid, you dont need any resistors.
If you are hooking up this output for another use, or for debugging, you will need the resistor.
and also i have question for you xenocron that bin file i sent you when i open it in TE it wont let me go above 10.85 in the fuel table is this intentional or did i do something wrong help me out im breakin out the wideband today..
#20
Re:HELP PS9 1 wire vtec
ok so i tryed the pgmfi-ng28 bin from turboedit.org made a basemap and every time i hit my vtec rpm it throws cel 19 (automatic lockup solenoid)i used the stable bin from ------------- and it works perfect is this an issue with the ng28 bin and which "ngXX" is on ------------- im confused and curious why ng28 throws code 19 and the stable bin doesnt....