mycrx

what all do i need to tune my car from my seat?, im thinking a romulator "but hows that work" does it just plug in? is it all plug and play?,also a notebook pc, im using turboedit with a pm6? any info would be very helpfull thanks.

mycrx

also will any basic cheap laptop work.

TurboEF9

ROMulator, EEPROM burner, serial cable, PII 300MHz laptop or faster.

ROMulator connects to the ECU in the ZIF socket (or the lo-profile socket) where the EEPROM goes. A serial cable runs from the ROMulator to the laptop. You open TurboEDIT, and opent he ROM you want to tune. Click on Tools -> Real Time Programmer (or some such ----, I can't remember what I named it) and it will sync the ROM with the ROMulator. Start the car, then edit the ROM just like you would any other way. All of the changes are made are updated in real=time, and you can watch them on the RTP Monitor (a small window that runs in the TurboEDIT tuning environment).

rudebwoy

does this romulator work with uberdata? and if so do you have a link for the romulator and setup?

mycrx

is the serial cable already on the romulator? i found one @ xtronics, also does it just plug in the same way a chip does?

TurboEF9

I don't think Blake ahs written support for UD.

ROMulator plugins into the ECU as if it were a chip, in the same spot. Any generic serial cable will work. Mine came with a serial cable, but then again, Karl gave me mine free for development.