HAVING TROUBLE!!!!!!!! HELP!!!HELP!!!
#1
HAVING TROUBLE!!!!!!!! HELP!!!HELP!!!
ok please help me out. my car is sitting out there because i can't figure out the wire instructions for dsm 450 cc. ok. there are only 4 resistors with a total of 8 connections. i have to cut the yellow wire in half. then solder the end of the yellow wire to the resistor. now there are more than 4 wires what do i do. how do i connect it. SOMEONE PLEASE HELP!!!!! I HAVE A 1995 TEG LS
#2
#3
Re:HAVING TROUBLE!!!!!!!! HELP!!!HELP!!!
yeah that helps but not to much. there are more that 4 yellow wires. how did he connect the rest of them.. thats the problem that i am having.
can i just go directly to the connector of the injector and cut the yellow wire and connect the resistor??
can i just go directly to the connector of the injector and cut the yellow wire and connect the resistor??
#4
Re:HAVING TROUBLE!!!!!!!! HELP!!!HELP!!!
ya, 1 yellow wire w/ black stripe per injector. That is the power wire for each injector (per jeff's write up).
I would just ignore other wires and splice resistors in there.
Would it not be easier and maybe better to use the resistor box from a obd0 car? you the plugs and proper connections so u dont have to cut your harness??
I would just ignore other wires and splice resistors in there.
Would it not be easier and maybe better to use the resistor box from a obd0 car? you the plugs and proper connections so u dont have to cut your harness??
#10
Re:HAVING TROUBLE!!!!!!!! HELP!!!HELP!!!
Go to the www.hondata.com web page there is a link (Tech) there you will see again many links klick the one that says "Injector wiring" there you will see how to huck up your car with DSM 450cc and the resistor box good luck dude