Ghettodyne on LS with PM6, cheap and wonderful
#1
Ghettodyne on LS with PM6, cheap and wonderful
well i blew up the tranny in my 91 teg but until then i was running (and will be running when i drop in the new tranny) ghettodyne with a PM6 ecu on the stock B18a. i of course use the 450cc dsm injectors and have only been running betreen 4 and 5 psi. she car runs great though. yes there are the ghettodyne "shakes" under vacuum with a load on the motor, but once its under boost the car is flawless. pulls hard all the way to redline (gotta love the T3) and stays just between the lines of rich and stoich on my A/F guage. its never detonated. she makes great smokey burnouts and ----. it works really well. btw, i use the Mr Dr PEP chip with 3000 rpm launch control, which i think is the only downfall of this chip. the launch control prevents actually leaving the line hard, its just not high enough for a good hard launch. but overall, its a great cheap way to manage your fuel on an OBD0 car, even the LS.
Brett
Brett
#3
Re:Ghettodyne on LS with PM6, cheap and wonderful
ok.. now I'm really lost. The tune I gave you is the one I gave the others and they are having problems....
hey man... can you refresh my memory or something ? I can't remember which tune I gave you... all I need to know is the setup you specified to me during our talks, etc... sorry, I'm just a little messed up right now.... this guy keeps emailing me about problems with the chip... (he's using a ZC with T3/4 setup and the same chip I gave you,,... now what's up with this?)
hey man... can you refresh my memory or something ? I can't remember which tune I gave you... all I need to know is the setup you specified to me during our talks, etc... sorry, I'm just a little messed up right now.... this guy keeps emailing me about problems with the chip... (he's using a ZC with T3/4 setup and the same chip I gave you,,... now what's up with this?)
#5
Re:Ghettodyne on LS with PM6, cheap and wonderful
the only problem i have is that it studders a little bit under vacuum. thats it, it runs fine. i have no problems. i mean, it idles a little low sometimes, but usually is just find after i give it one small rev. let me know if you have more probs with this tune, ill have you burn me another one as a backup. btw, it was 3000 rpm launch control, with 1 degree timing retard for every pound of boost, thats all i remember.
Brett
Brett
Thread
Thread Starter
Forum
Replies
Last Post
Tom-Guy
General Discussion
2
09-19-2005 11:12 PM
Dr.Boost
Engine Management
29
01-20-2005 01:02 AM