Nick32

well i got these injectors out of a 91 talon tsi, and i dont know what they are or how many cc they are etc.

someone please help me out and what else is needed to make them work in my d15b7.

the injectors say 96z on the... and there tag that is on the side says. 629-100 then 01.28.03 Python

someone please help.. im clueless to what these are and if they can be used with my setup

thanks
nick

J-MAN

1989-up Eclipse Turbo Peak and Hold 450cc

rsmith2786

http://users.erols.com/srweiss/tableifc.htm

Mitsu Black top. I think they are 450cc

warric_k

usually the 450 injectors have "450" on them.

turboDA6

if you got them out a 91 and there not blu top, there 240cc injectors.

bumblezc

Althoguh aren't Pythons a brand of replacement injectors.

The car may has tsi badging, but did it have the turbo? was it stick or auto.
I don't know what colour auto ones are, but they are 390cc. Sufficient for low boost apps.

Slo_crx1

If it's from a 1st gen auto tranny turbo motor (black tops), then I believe it's a 390cc. 1st gen turbo manual tranny's are usually blue tops, and they're rated 450cc. Non-turbo's are also black tops, but only 240cc i believe.

Nick32

its turbo and manual.... wierd.. hmm

they are bigger than my stock injectors on the civic anyways though right?
and where can i get resistors or whatever for the so they will work in my car?

thanks
nick

Slo_crx1

It's very possible that they are a replacement injector. If you're worried about it, try googling the name on them and see what you find. As far as the resistors, all you need is a resistor box from a civic or crx si, or 88-89 integra.

djfob

hmm if you want to be sure get them flow tested