ncspack7civic

I have a 95 civic ex with stock internals and a turbo kit ready to get put on. It is a t3 with external wastegate. The kit also came with a vortex FMU. My first question is is that fmu good enough for my set up. Im not going to push big boost just enough for alittle more get up and go for daily driving. Also i got a hold of some 450 injectors just in case. I read the thread on wiring them up with the resistor boxes, but my other question is this, can i run them with my fmu and my stock computer. Im of course on a budget so i would like to know of anything else i would need to do to make it a safe and reliable daily driver.

youdontknowmeee

jesus christ

90dx

The FMU is adequate for low boost like 5-6psi but ideally you want to use a chipped ecu and one of the programs like Uberdata,Crome etc to tune it with.You cant use the FMU with 450cc injectors.

Cray91

combine your questions into one post.

Do some looking around in teh FAQ section in here. You are asking simple questions that are addressed in the cliff's notes by projekteg.