I've searched for how to turn the FTL on and off with the A/C switch and don't quite understand "grounding B5"

If anyone can clarify, I'd really appreciate it! I'm thinking ground it to the chassis, but I saw on the Uber board that you're supposed to loop it with another wire?

Also, when the A/C switch is pressed in (on), that means the FTL is operational, right?

 

the last time i did the ac switch thing, which i think is not needed on the newest version... i went B5--->on/off switch-----> ground location.

 

I have an A/C switch on my dash. The original A/C wiring goes to an area around my passenger side headlight and stops. I removed the rest of the wiring when I removed the rest of the system.

But basically, I need to find out which one of those wires (there's 5) is B5 and then ground it to the chassis? Is that right?

 

sounds right, let me kno if it works

 

HOLY ----... You guys are so much help! Ha ha...

I'll give it a go tonight. I tried it a few nights ago and got tired of revving my engine up to 5,500 RPMs over and over again while I switched the wiring. My neighbors loved it too.

 

Does anyone have info on how to do this?

I grounded B5 to my chasis and tried every conceivable way to get it to work, and it doesn't work. It does work if I check the FTL/FTS box (all the time), but nothing with the Use A/C box seems to work.

By the way, I'm using 1.7... Maybe there's a bad script in there or something? I also tried 1.8 and that was a disaster.

 

Well, I just read somewhere else that the A/C switch will work, but you have to have the fan on...

WTF?

 

not to hyjack the tread, but can you enable the FTL with out altering the map?