First start with Turbo... questions
 

HEllo, I get a kit for mount a turbo, T25, in my civic hatch 5ª D16Z6,

I have the ecu chiped for NA setup, fuel map regulated according my wideband PLX250 and all ok


But I have questions before I goes to mount the turbo,,

Which fuel map I can use for the engine first start???, to avoid detonation, I think first go too rich and slowly, with the PLX, correcting the fuel map lowing fuel... but How calculate the fuel to first setup knowing the psi is about 8, I expect about 200hp, stock internals, stock injectors (but with wallbro pump), fuel 98 octanes... ??


And the second question, I dont understand ignition maps, how I can adjust this map to avoid detonation? I think I have to retard the ignition, but how much?? how I can monitorize this advancing and know if the adjust is correct or is a bad adjust?


THanks a lot really & sorry for my english.

Re: First start with Turbo... questions
 

What program are you using[Uberdata,turboEdit etc}?You need to get some injectors preferably DSM 450's and then you can make a basemap for your setup and use the iginition retard feature.Your stock injectors will not work there too small.