Extreme Hulog wont connect
Guest
Posts: n/a
Re: Extreme Hulog wont connect
Originally Posted by ifly87
OOOh yeah I doubble checked in device manager, and added quick datalogger+rtp, and removed checksum(if it matters). I thought the cable only went into the ecu one way but i'll doubble check that. grrr i'm getting angry.
I just bought one of these, maybe it will work with my old serial cable, anyone use one
?
http://cgi.ebay.com/USB-Serial-Port-...QQcmdZViewItem
I just bought one of these, maybe it will work with my old serial cable, anyone use one
?http://cgi.ebay.com/USB-Serial-Port-...QQcmdZViewItem
Thread Starter
3.0 BAR
Joined: Dec 2005
Posts: 2,081
Re: Extreme Hulog wont connect
I think I'm going to try the serial/usb adapter and hopefully that works with my serial cable.
There are 4 wires going to the CN2 connector in the ECU they are as follows
1.Orange
2.Red
3.Brown
4.Black
Do I need to do a pin swap, I read on moates website that the "older" units needed a pin swap but it doesnt say which units are the older ones or what pins to swap.
Thread Starter
3.0 BAR
Joined: Dec 2005
Posts: 2,081
Re: Extreme Hulog wont connect
This is messed up, I used a serial to usb converter, and used my old serial cable. Now it still gives me the message "could not connect to ecu" but when I click live tuning, it seems to be working, all the values in the datalogging window are correct and the little pink trace cell thingy works fine. Is this normal? well it works so I'm gonna quit messing with it.
3.0 BAR
Joined: Jul 2003
Posts: 6,447
Re: Extreme Hulog wont connect
Originally Posted by ifly87
This is messed up, I used a serial to usb converter, and used my old serial cable. Now it still gives me the message "could not connect to ecu" but when I click live tuning, it seems to be working, all the values in the datalogging window are correct and the little pink trace cell thingy works fine. Is this normal? well it works so I'm gonna quit messing with it.
