HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Engine Management (https://www.homemadeturbo.com/engine-management-10/)

- - DSM EVO 550's (https://www.homemadeturbo.com/engine-management-10/dsm-evo-550s-40852/)

Bone1

06-08-2005 02:42 AM

DSM EVO 550's

local guy was asking if the EVo 550's can be used in a 5g Honda DOHC H22 running boost.

I guess he got them cheap, I've no clue if they are like the blue DMS 450's.

warric_k

06-08-2005 02:20 PM

Re: DSM EVO 550's

as long as they fit the rail and the manifold, don't see why not.

tranceminister

06-08-2005 06:43 PM

Re: DSM EVO 550's

True, I don't see any reason they wouldn't work if they fit (as stated by warrick), just make sure you test to see if they are saturated or peak and hold type injectors.

Bone1

06-08-2005 07:29 PM

Re: DSM EVO 550's

thanks, Blundar answered his question on our local board.

Tom-Guy

06-09-2005 12:42 AM

Re: DSM EVO 550's

And the answer was? Inquiring minds want to know. :'(

tranceminister

06-09-2005 03:03 PM

Re: DSM EVO 550's

I was going to suggest that. Thanks Mr. Davis. I didn't want to ask incase Blundar knew otherwise... then I'd just feel like an ass for giving wrong information.

Bone1

06-09-2005 06:13 PM

Re: DSM EVO 550's

Quote:

most top feed injectors will work given a little coaxing... you might need to shim/remove shims for fuel rail, taper seals, etc. You'll need some re-tuning to get the car to even start with 550cc injectors, however.

Tom-Guy

06-10-2005 12:19 AM

Re: DSM EVO 550's

Cool. I was just afraid they'd require redrilling the fuel rail in order to fit, like some.

Bone1

06-10-2005 01:37 AM

Re: DSM EVO 550's

I know nothing, just a middle man on the issues.

Yes, a tranny teacher learning about ECU ----.

All times are GMT -5. The time now is 05:53 PM.