datalogging problems
Thread Starter
1.5 BAR
Joined: Aug 2004
Posts: 710
datalogging problems
yes i have searched but couldnt find, so dont flame.
well i installed crome and it is ------- fast at only 7psi. but i want to know what is going on in my motor with the datalogging and i cant figure it out. i i i cant figure out what program to use 1. for the usb connector i have, and 2. for the datalogging.
i got a program called ECUcontrol and i cant figure out how to get a live reading from my datalogging cable from my ecu.
need help thanks
well i installed crome and it is ------- fast at only 7psi. but i want to know what is going on in my motor with the datalogging and i cant figure it out. i i i cant figure out what program to use 1. for the usb connector i have, and 2. for the datalogging.
i got a program called ECUcontrol and i cant figure out how to get a live reading from my datalogging cable from my ecu.
need help thanks
Guest
Posts: n/a
Re: datalogging problems
You are a dumb sack of ---- once again.
You are using Crome.... so that is the program you use to datalog.
If you are using a serial->USB adaptor then google for drivers. I'm not even gonna tell you where they are if you can't find them.
I also thought you might be hungry... so here ya go
You are using Crome.... so that is the program you use to datalog.
If you are using a serial->USB adaptor then google for drivers. I'm not even gonna tell you where they are if you can't find them.
I also thought you might be hungry... so here ya go
1.5 BAR
Joined: Aug 2004
Posts: 948
Re: datalogging problems
I don't think the free version offers datalogging. I guess for that you have to use ECU Control.
I also thought there was a slight difference in hardware setup for Uber & Crome. If you're using an Uber ECU, there's some kind of jumper change, but I don't know what it is.
Good luck.
I also thought there was a slight difference in hardware setup for Uber & Crome. If you're using an Uber ECU, there's some kind of jumper change, but I don't know what it is.
Good luck.
Thread Starter
1.5 BAR
Joined: Aug 2004
Posts: 710
Re: datalogging problems
Originally Posted by jagojon3
You plug in your datalogging cable, turn the car on, BAM you got a live feed
Originally Posted by 95RedEX
I also thought there was a slight difference in hardware setup for Uber & Crome. If you're using an Uber ECU, there's some kind of jumper change, but I don't know what it is.
1.0 BAR
Joined: Jan 2005
Posts: 425
Re: datalogging problems
yes for all datalogging except for uber, you have to cut or remove Jumper at J12.
Try using Cuddle for datalogging. It is on the PGMFI.org forum. John wrote that as well I believe.
If you want datalogging integrated into the program try uberdata.
Try using Cuddle for datalogging. It is on the PGMFI.org forum. John wrote that as well I believe.
If you want datalogging integrated into the program try uberdata.
Guest
Posts: n/a
Re: datalogging problems
Originally Posted by DeleriouS
Originally Posted by jagojon3
You plug in your datalogging cable, turn the car on, BAM you got a live feed
You are a scab, a disease on this society we know as HMT. Go fist your grandma, it'd be more productive than anything you do to your car.
