I have the usb datalogging cable soldered inside ecu. And I also know i have to cut the D14 wire and hook up the wideband to it. But what wire from the LC-1 do i hook up to the D14 wire?

 

There are two outputs from the wideband as per the directions in the Innovate instructions...program these as you need to using the Innovate software. Hook up the wire you program as your wideband output to log the wideband signal.

 

you mean the provided serial cable? But aren't there more than one wire inside the serial cable?

 

No there are two single wire outputs...I dont remember the colors but if you read the directions they will tell you.

 

Then I hook up the white wire onto the D14 pin and that should allow me to datalog with uberdata then right?

 

Well...that will feed the signal into the ECU...if you have datalogging working correctly, it will now log the signal.