Conversion Harness obd2 to obd1
 

I am in the process of getting rid of my ej coupe for 99 civic hatch european specs the car comes with a 1.4l engine, that I planned to remove and replace it with my built motor.

my question is do I have anything to worry about as for as compatibilty? putting a obd1 motor in a obd2 euro car using a obd1 ecu. is the 99 obd2 or obd2b?

I will buy this car tomarow. 220killometers away from me. $2500
link to the car
http://suchen.mobile.de/fahrzeuge/sh...g=&tabNumber=2

Re: Conversion Harness obd2 to obd1
 

I am reading info via this thread:
http://www.honda-tech.com/showthread...1972711&page=2

Re: Conversion Harness obd2 to obd1
 

99 00 civics are obd2B 96-98 obd2A you neeed the obd1--->obd2B jumper all else is plug and play just
do you have the different ek brakets for the swap? you cand use you dc/eg

Re: Conversion Harness obd2 to obd1
 

you are saying I cannot use the ones on the eg ? they are from a 94 LS integra. what about the suspension stuff? this civic also have ABS.
what else can't I use from the EG? suspension and brakes wise, I have SRR rear sway bar, K sport coilovers. megan Rear control arms. EDT traction bar. integra front and rear brakes.

Re: Conversion Harness obd2 to obd1
 

braKES and suspension are all plug and play just when putting eg stuff in the ek the control arms (front A arms upper) the ek has holes in the stock tower to bolt then in plugged with plastic plugs just pull em out and your good (if you want to re use you camber kit or whatever.)

ABS just put the abs sensors in your dis hubs there should be a hole there for it and you will need axles with the ring wiht teeth on them for the abs (front) rear i dont know about i didnt mess with but if your ---- is off a DC integra 94-01 they all have abs standard usdm (jdm/edm wahte ever :8 is wack might not have abs on all)

engine mounts

the front lower transmission and engine mount.. are reusable.. and the drivers side you need the block braket (iron pice) from a b16a2 block 99-00 si and the matching stock rubber mount from ek aftermarket conversion mount for that..

Re: Conversion Harness obd2 to obd1
 

also need 99-00 si or jdm ek b16a rear transmission bracket

Re: Conversion Harness obd2 to obd1
 

so I cannot use the one that I currently use with my B series motor in the EG?

Re: Conversion Harness obd2 to obd1
 

NOPE

Re: Conversion Harness obd2 to obd1
 

any reasons why it wont work?
I plan to transfer everything from the EG to the EK to include motor mounts since they are upgraded. so what are the reason why the b16a bracket wont work in the ek?

Re: Conversion Harness obd2 to obd1
 

bolt pattern is off learned that in 1998