chipped p06 = fail HELP for daily ride please *FIXED*
#1
chipped p06 = fail HELP for daily ride please *FIXED*
I'm having trouble getting my ECU to take a tune! Its a chipped PO6 out of a dx i used to own. and it was running with working vtech before with a stock P28 tune. NO CEL CODES
Symptoms with now installed turbo setup are very rich when in vacuum, like 9:1 ....10:1 AFR's and we can't get the o2 sensor turned off.
So it is giving us codes 41 (oxygen sensor heater) and 3 (map sensor)
what can i check? Do? Is there something we could have missed in chrome?, my bud dvst8r was helping me but we only had a couple hours cause i had to drive home.
Symptoms with now installed turbo setup are very rich when in vacuum, like 9:1 ....10:1 AFR's and we can't get the o2 sensor turned off.
So it is giving us codes 41 (oxygen sensor heater) and 3 (map sensor)
what can i check? Do? Is there something we could have missed in chrome?, my bud dvst8r was helping me but we only had a couple hours cause i had to drive home.
#4
Re: chipped p06 = fail HELP for daily ride please NSFW
Other than the newly installed turbosetup, its a completely stock 92 civic SI.
I was on the couch in between puking my guts out because of the flu and without taking time off work. blablababla
here is a better description of my problem
http://forum.pgmfi.org/viewtopic.php?f=29&t=16483
Car is running in limp mode and I don't like 16mpg
I was on the couch in between puking my guts out because of the flu and without taking time off work. blablababla
here is a better description of my problem
http://forum.pgmfi.org/viewtopic.php?f=29&t=16483
Car is running in limp mode and I don't like 16mpg
#8
Re: chipped p06 = fail HELP for daily ride please NSFW
Originally Posted by trevor72
So it is giving us codes 41 (oxygen sensor heater) and 3 (map sensor)
While I'm getting the car to run with the tune we put on my spare chip, "beerbongskickass", still doesn't explain why the car wouldn't take the first dozain tunes we tried. (we tried turning off the o2 in all tries).
Thanks guys will post pics when i get around to it, or maybe when i'm doing the clutch.
#9
Re: chipped p06 = fail HELP for daily ride please NSFW
I put in a new map sensor last night and I still get a bad hesitation (feels like rev limit/ spark being shut off) on tip into boost. If i floor it as this happens it feels like the motor is shut off (similar to a top speed governor) and the CEL comes on when it goes into boost too.
Any suggestions please feel free to shout em out,
Any suggestions please feel free to shout em out,
#10
Re: chipped p06 = fail HELP for daily ride please NSFW
Originally Posted by trevor72
I put in a new map sensor last night and I still get a bad hesitation (feels like rev limit/ spark being shut off) on tip into boost. If i floor it as this happens it feels like the motor is shut off (similar to a top speed governor) and the CEL comes on when it goes into boost too.
Any suggestions please feel free to shout em out,
Any suggestions please feel free to shout em out,
rev lim/speed gov is fuel cut.