chip burning problem
im using willem burner;and when i try to burn a chip it says ERROR: WRITE SECTOR 0
|
Re:chip burning problem
same thing happens to me with my batronix
try a different computer |
Re:chip burning problem
why is it cause of windows XP ;and i only have one computer :'(
|
Re:chip burning problem
make sure you get the newest version of the software for the willem. I tryed burning chips on the older versions and none of them worked except for the new one.
|
Re:chip burning problem
Also try erasing the chip (if an eprom) an/or try using another eprom. I've had some faulty eproms give me programming errors etc., but others work fine.
|
Re:chip burning problem
ive tried 3 diffrent chips
|
Re:chip burning problem
try ur friends computer or go to the library and use it there ;)
|
Re:chip burning problem
Im successfully burning with my Willems this is what i've found to help:
Make sure you jump 3&31 for 29c chips Use Ver 97g of the software Turn off virus ---- Disconnect from the internet (i've found that mine wont burn if i'm online) |
Re:chip burning problem
weres jumpers 3 & 31 at
|
Re:chip burning problem
on this zif socket, pin 3 is the third down from the top on the left side, pin 31 is the second pin down from the top on the right side. Just put a piece of wire connecting them.
|
Re:chip burning problem
ok its burning now; but at the end of the burn ;i get another error;im still using the newest version;how do i get ver.97
|
Re:chip burning problem
this may be a moot point, but blundar once mentioned that his was very sensitive to power supply voltage. i believe he said it only started working reliably at 24v input. i made a 24v power supply before i'd ever even used mine. i've been using it a while now and i've never once had an error. might be worth a try.
oh yeah, i'm also using the 97g software. |
Re:chip burning problem
im only using 12v power and it works
I have ver 97g at home (not home now) and I can email it to you (well mabye, depends on size) Check their webpage they should have an archive there willems.org or something |
Re:chip burning problem
ok i downloaded the new software;i only thought the power supply had to be 9v 300ma;so i can hook up a 12 power supply
|
Re:chip burning problem
yeah it should be 12v 800ma IIRC
|
Re:chip burning problem
well i got a 12v power supply;i plug it in; and it burnt the transistor up; to the right of the plug;my usb power still works;so can i replace the transistor
|
Re:chip burning problem
www.willem.org or something like that is their website. check on their messageboards for technical stuff
|
All times are GMT -5. The time now is 12:09 AM. |
© 2024 MH Sub I, LLC dba Internet Brands